Returns Scroll Stop Automatic mode

Engines or processes over unity, debate and ideas ?engine hp Briggs 5

Myth or reality? The question remains! You decide on this part of the forum, processes such as Tesla's inventions, Newman, Perendev, Galey, Bearden, cold fusion ...

Search of perpetual motion is a "fantasy" of the human mind for centuries ...
Colmant
I understand econologic
I understand econologic
posts: 101
Registration: 05/09/06, 10:40
Location: vaucluse

engine hp Briggs 5

Unread Messageby Colmant » 22/04/07, 08:23

Hello ,
I have a problem on my generator driven by a B & S 5 horizontal hp: I broke the rod
I hesitate to tapper out above the rotor and side launcher have the impression that the steering wheel is set
Who can tell me how to get out the villo
I'm looking for the exploded

merci
0 x

Colmant
I understand econologic
I understand econologic
posts: 101
Registration: 05/09/06, 10:40
Location: vaucluse

Unread Messageby Colmant » 22/04/07, 12:35

good it's going, I did manage to me with a little logic is easy.

my mechanic told me that I could throw my group, that 's a pro.
thank you to pit
Closing of the subject for now
I will return if fair ca ...
good week-end
0 x
Other
Pantone engine Researcher
Pantone engine Researcher
posts: 3787
Registration: 17/03/05, 02:35
x 8

Re: engine briggs 5 hp

Unread Messageby Other » 22/04/07, 17:01

Hello
Colmant wrote:Hello ,
I have a problem on my generator driven by a B & S 5 horizontal hp: I broke the rod
I hesitate to tapper out above the rotor and side launcher have the impression that the steering wheel is set
Who can tell me how to get out the villo
I'm looking for the exploded

merci


this is common monaie peter wrist (link) on these engines
biele is the duralumin and costs a $ 10 and chamge facillement
loosens the nut of the steering wheel flush with the last thread with a bronze is an aid tiend the engine by the flywheel, a hammer on the nut without maganer nets, he'll sortire is tapered with a half key Moon
opens the housing disassembled the rod examines éventuellemnet focused on the crankshaft with a strip of sandpaper 250 a little bit of polishing, cleans well gasoil to remove traces of sanding puts oil on the back and brought all

The pettent rod when it rotates faster than 3600rpm or that lack of oil, or the engine is running in an abnormal angular position (mowers that cut into a slope, you must reverse the position so that the oil has arrived the connecting rod, c, is by bubbling fat, you also change the oil once a year on or not working ..

Andre
0 x
Colmant
I understand econologic
I understand econologic
posts: 101
Registration: 05/09/06, 10:40
Location: vaucluse

Unread Messageby Colmant » 23/04/07, 11:52

Hello André,
merci,
I found the link on e bay, Austin texas 19,95 6 + usd usd port
by us postal plane delai of reception 10 days ...
manufacture in Taiwan brand Stens: www.stens.com
I could perhaps find meadows + and - probably expensive but I took the 1 ° found ...

there is an agent 10 km from home, found after the Briggs and Stratton site.

for disassembly unscrew the ball cage of the manual launcher
and a little bit hard on the steering wheel
on the other side I unscrewed the alternator rotor by squeezing between two wooden blocks with a tight seal greenhouse


good I go back, we need ca turn tonight it's easy

I found a handyman on the net that is pro mechanic who will send me erupted in pdf I must verifies the valve timing to + - 1 tower
a+
bruno
0 x


 


  • Similar topics
    Replies
    views
    Last message

Back to "motors or processes over unity, debate and ideas? "

Who is online ?

Users browsing this forum: Majestic-12 [Bot] and invited 1

Popular searches