greetings,
I made some corrections regarding my invention (already posted here).
it's more about the philosophy of operation, it's useful to understand the thing.
here is the link to the corrected article;
http://www.facebook.com/note.php?saved& ... 8755855531
thanks.
Correction; endless energy engine.
- Obamot
- Econologue expert
- posts: 28725
- Registration: 22/08/09, 22:38
- Location: regio genevesis
- x 5538
Didn't you understand Alain G?
Its goal is:
https://www.econologie.com/forums/post233248.html#233248
"The invention" it's just for the buzz. because:
Its goal is:
snapshoot wrote:mon exposed me read and [...] me doing know
https://www.econologie.com/forums/post233248.html#233248
"The invention" it's just for the buzz. because:
snapshoot wrote:it is useful to understand the thing.
Last edited by Obamot the 29 / 06 / 12, 19: 35, 3 edited once.
0 x
-
- Econologue expert
- posts: 5111
- Registration: 28/09/09, 17:35
- Location: Isére
- x 554
Re: correction; inexhaustible energy motor.
snapshoot wrote:greetings,
I made some corrections regarding my invention (already posted here).
it's more about the philosophy of operation, it's useful to understand the thing.
here is the link to the corrected article;
http://www.facebook.com/note.php?saved& ... 8755855531
thanks.
well i will not go.
0 x
-
- Moderator
- posts: 79117
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 10972
let's talk a bit about the subject, before closing it.
PS1; on digital simulation (or computerized mathematical model), I am not an expert on these "mechanical" oriented softwares, since I was originally trained as an electronics engineer, so it's Mplab, Eagle and Pspice are my specialty, but I However, I'm not a moron on the mechanical-oriented simulation side, I have masturbated my brain enough with Solidworks, I master it well enough, enough to model objects, put them in more or less real contions, and run calculations (simulations ) with the most diverse parameters (to sweep all the possibilities).
but if you prefer, we will do it the old way; in pencil, without any calculation software!
therefore?
PS2; my nickname is snapshoot, "snap" and "shoot" .... its translation is "instantaneous shoot".
PS1; on digital simulation (or computerized mathematical model), I am not an expert on these "mechanical" oriented softwares, since I was originally trained as an electronics engineer, so it's Mplab, Eagle and Pspice are my specialty, but I However, I'm not a moron on the mechanical-oriented simulation side, I have masturbated my brain enough with Solidworks, I master it well enough, enough to model objects, put them in more or less real contions, and run calculations (simulations ) with the most diverse parameters (to sweep all the possibilities).
but if you prefer, we will do it the old way; in pencil, without any calculation software!
therefore?
PS2; my nickname is snapshoot, "snap" and "shoot" .... its translation is "instantaneous shoot".
0 x
- Obamot
- Econologue expert
- posts: 28725
- Registration: 22/08/09, 22:38
- Location: regio genevesis
- x 5538
Since you say to be "originally trained electronics engineer", Very simple question:
- how do you replace an ordinary 1,5 Volt “type A” battery at 2500 mAh:
... by a capacitor? (As is found in many internal circuits of electronic devices - of the type battery eliminator - to keep the preferences stored in memory during battery replacement).
What you are asked:
- what must be done so that your condo discharges in the same way as a battery? And to calculate us the suitable element, so that there is no difference from a standard stack?
- what is the exact type of condo exactly suited to this use and obviously its required value and performance?
- note: the capacity of the condo must be equivalent to or greater than the capacity of a standard battery as described above.
You see, this is a simple question for an electronics engineer, who is also a "researcher".
Any attempt not to respond will demonstrate that you are dodging because you do not have the skills that you claim. And you have an interest in responding very quickly!
- how do you replace an ordinary 1,5 Volt “type A” battery at 2500 mAh:
... by a capacitor? (As is found in many internal circuits of electronic devices - of the type battery eliminator - to keep the preferences stored in memory during battery replacement).
What you are asked:
- what must be done so that your condo discharges in the same way as a battery? And to calculate us the suitable element, so that there is no difference from a standard stack?
- what is the exact type of condo exactly suited to this use and obviously its required value and performance?
- note: the capacity of the condo must be equivalent to or greater than the capacity of a standard battery as described above.
You see, this is a simple question for an electronics engineer, who is also a "researcher".
Any attempt not to respond will demonstrate that you are dodging because you do not have the skills that you claim. And you have an interest in responding very quickly!
0 x
the discharge of a codo through a resistor is not a "linear" curve, we will have (over time) a decrease in the voltage and current at the terminals of our load.
but this rate of "sagging" of the quantities (i and v) depends on two main parameters; the capacity of the condo, and the resistance of the load.
so, theoretically, we can replace a battery (of a certain type) with a condo ..... but it is very conditioned as we have already seen.
I made you there a descriptive "study" of the thing, like that, on the fly, if you want a mathematical demonstration (with blows formulas enriched in derivative and integrals) I must go back to my lessons of ten ago years ...... you want some?
so give me a little time to revise all that and I come back.
to +.
PS:
I'm afraid we're going to move away from my subject there.
but this rate of "sagging" of the quantities (i and v) depends on two main parameters; the capacity of the condo, and the resistance of the load.
so, theoretically, we can replace a battery (of a certain type) with a condo ..... but it is very conditioned as we have already seen.
I made you there a descriptive "study" of the thing, like that, on the fly, if you want a mathematical demonstration (with blows formulas enriched in derivative and integrals) I must go back to my lessons of ten ago years ...... you want some?
so give me a little time to revise all that and I come back.
to +.
PS:
I'm afraid we're going to move away from my subject there.
0 x
Go back to "Innovations, inventions, patents and ideas for sustainable development"
Who is online ?
Users browsing this forum : No registered users and 122 guests