small help request

[cybergrunch]

Hi, I congratulate you on this achievement
I did the same thing but entirely in copper and it works well
a little gas to start,
then tests at: 25% petrol, 75% water
or 50/50 it works, the only problem after 15 min the engine slows down and goes out
no way to relaunch it ???
he consumed practically nothing in water and sp95
I redo a mixture, it starts again nikel and rebelote after 15 min
do you know why
thank you for an A ++ response

[Misterloxo]

Hi cybergrunch,

we don't really know what achievement you're talking about.

But, from what you say, it looks like your montage consumes only the hydrocarbons which are more volatile than water.

[cybergrunch]

hi, i put into practice the pantome mower with the J p naudin reactor according to the plan found on quanthomme
sorry for the amalgam
A ++

[the joint]

I have the same problem on my tiller, I have to put in "new" gasoline so that it can restart

[Misterloxo]

Donations from what I understand, you have a bubbler with a mixture of water and hydrocarbon.

If it is necessary to add hydrocarbon (or remake the mixture) it is typically that only the hydrocarbons are consumed with bubbling because more volatile than water.

Moreover, "historically" this is why the Quanthomme team has developed the G system (Pantone à la française) where only water is bubbled ...

[cybergrunch]

hi, thank you for your response which indicates a small change
so if i understand correctly
I have to give a fuel:

in front of the intake or before the reactor so that gasoline passes through it

and that water in the reactor
can you confirm the location of the fuel
thank you A ++

[cybergrunch]

Hello, there is no one who answers A +