Hello everyone
I installed my pantone on my boxer peugeot 2.5l atmo
since 1 months, it has done for the moment 1500 km
I realized that depending on the type of water, it works well
8 liters instead of 11 liters.si I put water with a Ph 7.2 or 7.3 (I controlled it), the pantone does not work at all, it consumes water point bar !!!
but if I put water (as at home) javelisée and a little limestone, the pantone works very well, the same odds mounted in 4eme he mounted in 5eme without worry
I would have to make the water more acidic .........!
my pantone
1 all stainless steel reactor with a length of 330mm
1 Gv outside, explanation !!! the exhaust tube was cut on 170mm replaced by the same tube but in stainless steel, + another larger stainless steel tube, with an annular space of 2mm, then welded on the first stainless steel tube
1 constant level, recup of a truck brake jar, float placement, and proximity sensor detection for cut-off
water inlet
I have not put a temperature probe for now
good day to all.
Gillier pantone on Peugeot Boxer atmospheric 2.5l
Hello cyclone85 Welcome to the club
You do not have some pictures and explanations on the engine to whet our appetite?
Good mechanical.
A+
You do not have some pictures and explanations on the engine to whet our appetite?
Good mechanical.
A+
0 x
Reason is the madness of the strongest. The reason for the less strong it is madness.
[Eugène Ionesco]
http://www.editions-harmattan.fr/index. ... te&no=4132
[Eugène Ionesco]
http://www.editions-harmattan.fr/index. ... te&no=4132
Re: Gillier pantone on Boxer Peugeot 2.5l atmospheric
cyclone85 wrote:I realized that depending on the type of water, it works well
8 liters instead of 11 liters.si I put water with a Ph 7.2 or 7.3 (I controlled it), the pantone does not work at all, it consumes water point bar !!!
but if I put water (as at home) javelisée and a little limestone, the pantone works very well, the same odds mounted in 4eme he mounted in 5eme without worry
I would have to make the water more acidic .........!
then, rain water or robient water?
in any case there is a chemical phenomenon ...
do you have the exact composition of "water that works"?
merci!
0 x
pantone
Hello Flytox
I sent 3 photos, but it did not work, I did not understand the principle, I must be null.
I will do otherwise
https://www.econologie.info/share/partag ... eAQxLf.GIF
https://www.econologie.info/share/partag ... 5ke46k.GIF
https://www.econologie.info/share/partag ... 7WPhCh.GIF
have a good day
I sent 3 photos, but it did not work, I did not understand the principle, I must be null.
I will do otherwise
https://www.econologie.info/share/partag ... eAQxLf.GIF
https://www.econologie.info/share/partag ... 5ke46k.GIF
https://www.econologie.info/share/partag ... 7WPhCh.GIF
have a good day
0 x
pantone
Hello Jonule
Yes, there is a difference between tap water, which is hard in the Vendée (bleach, limestone) and the water from the Landes, which has a Ph 7.2 and 7.3
I lived in this department 2 years ago and I owned an aquarium.
too pure water is bad for the pantone, it does not work!
I will do a test with 10cc ammonia for 10 liters of water
I have a friend who is driving at the moment, with the first tests with ammonia, his van Ford has never had so much fishing, especially since it rolls 100% HVB
have a good day
congratulations for your site
Yes, there is a difference between tap water, which is hard in the Vendée (bleach, limestone) and the water from the Landes, which has a Ph 7.2 and 7.3
I lived in this department 2 years ago and I owned an aquarium.
too pure water is bad for the pantone, it does not work!
I will do a test with 10cc ammonia for 10 liters of water
I have a friend who is driving at the moment, with the first tests with ammonia, his van Ford has never had so much fishing, especially since it rolls 100% HVB
have a good day
congratulations for your site
0 x
-
- Similar topics
- Replies
- views
- Last message
-
- 5 Replies
- 13299 views
-
Last message by Flytox
View the latest post
06/11/17, 23:41A subject posted in the forum : Water injection in engines: montages and experiments
-
- 21 Replies
- 32544 views
-
Last message by dede2002
View the latest post
17/02/14, 21:05A subject posted in the forum : Water injection in engines: montages and experiments
-
- 1 Replies
- 8986 views
-
Last message by Christophe
View the latest post
07/02/11, 10:33A subject posted in the forum : Water injection in engines: montages and experiments
-
- 0 Replies
- 6365 views
-
Last message by Angular stone
View the latest post
07/02/11, 10:19A subject posted in the forum : Water injection in engines: montages and experiments
-
- 15 Replies
- 22131 views
-
Last message by Flytox
View the latest post
11/03/10, 21:17A subject posted in the forum : Water injection in engines: montages and experiments
Back to "Water injection in the engines: the assembly and experimentation"
Who is online ?
Users browsing this forum : No registered users and 214 guests