Hi everybody !
Everything is in the title, it is there:
http://reaction.directe1.free.fr/index.htm#GV_corrected
See you soon !
Michel
IMPORTANT UPDATE for the GV!
- camel1
- Pantone engine Researcher
- posts: 322
- Registration: 29/01/05, 00:29
- Location: Loire
- x 1
- Contact :
IMPORTANT UPDATE for the GV!
Last edited by camel1 the 29 / 06 / 07, 01: 39, 2 edited once.
0 x
We were on the brink, but we made a big step forward ...
- Woodcutter
- Econologue expert
- posts: 4731
- Registration: 07/11/05, 10:45
- Location: Mountain ... (Trièves)
- x 2
Hi Michel, happy to read you. I took the opportunity to see the data of the bench.
From what you say on the Merco page, maybe you will go back a day of data acquisitions with the assembly "all ready"?
Did you advance on that?
Congratulations in any case for these manipulations, it is the first time that it is realized, it seems to me?
From what you say on the Merco page, maybe you will go back a day of data acquisitions with the assembly "all ready"?
Did you advance on that?
Congratulations in any case for these manipulations, it is the first time that it is realized, it seems to me?
0 x
"I am a big brute, but I rarely mistaken ..."
- camel1
- Pantone engine Researcher
- posts: 322
- Registration: 29/01/05, 00:29
- Location: Loire
- x 1
- Contact :
Hi Bucheron, and the others!
Ben we are very busy with Didier lately on our project betweenPOTE, so Réaction Direct is in standby, but more for a long time, we inaugurate our local in a fortnight.
There's a way to see the work here:
http://www.entrepote.org/actus/Local210507/Local210507.php
Since this report, it deboned serious, the walls are peddled (stone) joints and electricity redone, and the past sander, it will be beautiful!
After this step, we are active on the search for a workshop / garage BE, and we will do the G + at a glance !: D ... and we will resume vibration test manips.
In addition, Yoan is active on a passage to the bench of a G + for very soon, with large resources behind, so more experience feedback that will fuel the "scientific" debate around understanding the process ...
Thank you, say that there have already been some benchmarks (including Boulon) but few having recorded undeniable positive results ...
To be continued...
Michel
Woodcutter wrote:Hi Michel, happy to read you. I took the opportunity to see the data of the bench.
From what you say on the Merco page, maybe you will go back a day of data acquisitions with the assembly "all ready"?
Did you advance on that?
Ben we are very busy with Didier lately on our project betweenPOTE, so Réaction Direct is in standby, but more for a long time, we inaugurate our local in a fortnight.
There's a way to see the work here:
http://www.entrepote.org/actus/Local210507/Local210507.php
Since this report, it deboned serious, the walls are peddled (stone) joints and electricity redone, and the past sander, it will be beautiful!
After this step, we are active on the search for a workshop / garage BE, and we will do the G + at a glance !: D ... and we will resume vibration test manips.
In addition, Yoan is active on a passage to the bench of a G + for very soon, with large resources behind, so more experience feedback that will fuel the "scientific" debate around understanding the process ...
Congratulations in any case for these manipulations, it is the first time that it is realized, it seems to me?
Thank you, say that there have already been some benchmarks (including Boulon) but few having recorded undeniable positive results ...
To be continued...
Michel
0 x
We were on the brink, but we made a big step forward ...
camel1 wrote:After this step, we are active on the search for a workshop / garage BE, and we will do the G + at a glance !: D ...
Hello
well at the rate where you left, when your multinationals will need an agent at the meeting or mada; I am a candidate
@ soon
0 x
Said the zebra, freeman (endangered breed)
This is not because I am con I try not to do smart things.
This is not because I am con I try not to do smart things.
- camel1
- Pantone engine Researcher
- posts: 322
- Registration: 29/01/05, 00:29
- Location: Loire
- x 1
- Contact :
Hi Zac!
Hihihi!
No problem! We expect to see "branches" pop up all over the place! Yaka!
A ++
Michel
PS. You have the good morning of Jean-Claude and Marie
zac wrote:well at the rate where you left, when your multinationals will need an agent at the meeting or mada; I am a candidate
@ soon
Hihihi!
No problem! We expect to see "branches" pop up all over the place! Yaka!
A ++
Michel
PS. You have the good morning of Jean-Claude and Marie
0 x
We were on the brink, but we made a big step forward ...
camel1 wrote:No problem! We expect to see "branches" pop up all over the place! Yaka!
Hello
ben Poitiers it moves a lot too ... in search of workshop too ... and a good welder here because that of the association is in Haute Savoie
but with the Festival of the Earth this WE, we made good contacts ...
good luck to all
@+
0 x
"To do something is expensive, to do nothing will cost much more." Koffie Annan
next species endangered: Man ... and it will be good for him !!!
MAN IS A VERY DANGEROUS POLLUTION NATURAL!
next species endangered: Man ... and it will be good for him !!!
MAN IS A VERY DANGEROUS POLLUTION NATURAL!
-
- Similar topics
- Replies
- views
- Last message
-
- 14 Replies
- 8003 views
-
Last message by georges100
View the latest post
11/06/08, 00:15A subject posted in the forum : Water injection in engines: montages and experiments
-
- 4 Replies
- 4376 views
-
Last message by willoz
View the latest post
16/01/08, 17:53A subject posted in the forum : Water injection in engines: montages and experiments
Back to "Water injection in the engines: the assembly and experimentation"
Who is online ?
Users browsing this forum : No registered users and 136 guests