bonsoir,
it looks nice what do you think ??
http://www.youtube.com/watch?v=-5mNU2KhnYI
magnetic motor shutter?
-
- Grand Econologue
- posts: 1155
- Registration: 21/06/09, 01:02
- Location: Britain BZH powaaa
- x 2
-
- Grand Econologue
- posts: 1155
- Registration: 21/06/09, 01:02
- Location: Britain BZH powaaa
- x 2
Dedelco looks on the video it is marked Numero 8 it means that there are 7 before that it is the last;).
The principle is on the offset of magnets and to close (therefore to deflect the flows I imagine) thanks to the perforated plate (shutters).
Alain you know if he made a suite of larger diameter ??
see you
The principle is on the offset of magnets and to close (therefore to deflect the flows I imagine) thanks to the perforated plate (shutters).
Alain you know if he made a suite of larger diameter ??
see you
0 x
hack
You can follow several experiments carried out by Quartz on the magnetic including this one:
https://www.econologie.com/forums/polemique- ... t5524.html
If you do a search under his name you will find most of his experiments done live on econology!
Unfortunately all his experiences turned out to be in vain, we followed him closely at the time and it was very captivating!
Thanks again to Quartz for this hard work!
You can follow several experiments carried out by Quartz on the magnetic including this one:
https://www.econologie.com/forums/polemique- ... t5524.html
If you do a search under his name you will find most of his experiments done live on econology!
Unfortunately all his experiences turned out to be in vain, we followed him closely at the time and it was very captivating!
Thanks again to Quartz for this hard work!
0 x
Stepping behind sometimes can strengthen friendship.
Criticism is good if added to some compliments.
Alain
Criticism is good if added to some compliments.
Alain
Good evening everyone,
The realization is mine of course, but the idea (very good) is to Capt_Maloche, I spent quite a bit of time grinding the beast.
I stopped after differences of opinion with myself!
I went in the wrong direction trying to multiply magnets and shutters.
In fact the system works best with few magnets, the best configurations found were between 5 and 7 magnets, and 4 or 8 shutters, depending on the quantity of shutters opposite the magnets we turn in one direction or in the other.
If I had had the means to design a more mechanical model I would have continued to search, because there was a way to gain a little on the resistance to rotation of the shutter, which was very strong on the first model compared to to the recoverable couple.
other images here for those interested.
The realization is mine of course, but the idea (very good) is to Capt_Maloche, I spent quite a bit of time grinding the beast.
I stopped after differences of opinion with myself!
I went in the wrong direction trying to multiply magnets and shutters.
In fact the system works best with few magnets, the best configurations found were between 5 and 7 magnets, and 4 or 8 shutters, depending on the quantity of shutters opposite the magnets we turn in one direction or in the other.
If I had had the means to design a more mechanical model I would have continued to search, because there was a way to gain a little on the resistance to rotation of the shutter, which was very strong on the first model compared to to the recoverable couple.
other images here for those interested.
0 x
Every minute that passes is an opportunity to change the course of your life.
YouTube page, Dailymotion page, Picasa album, personal Pages, Viktor Schauberger
YouTube page, Dailymotion page, Picasa album, personal Pages, Viktor Schauberger
-
- I understand econologic
- posts: 134
- Registration: 16/06/07, 01:35
- x 4
to identify lost brains, it is good to put clear references to what exists:
http://energythic.com/usercontent/3/200 ... c_gear.pdf
http://energythic.com/view.php?node=78
The basic article with the gear teeth replaced by magnets:
http://vbn.aau.dk/files/16347675/the_cy ... c_gear.pdf
And serious industrial sellers:
http://www.magnomatics.com/
But the energy is conserved with low magnetic losses if the efforts are not excessive and too fast.
It should have been developed 15 years earlier!
http://energythic.com/usercontent/3/200 ... c_gear.pdf
http://energythic.com/view.php?node=78
The basic article with the gear teeth replaced by magnets:
http://vbn.aau.dk/files/16347675/the_cy ... c_gear.pdf
And serious industrial sellers:
http://www.magnomatics.com/
But the energy is conserved with low magnetic losses if the efforts are not excessive and too fast.
It should have been developed 15 years earlier!
0 x
-
- Similar topics
- Replies
- views
- Last message
-
- 18 Replies
- 8285 views
-
Last message by Christophe
View the latest post
06/09/22, 00:50A subject posted in the forum : Innovations, inventions, patents and ideas for sustainable development
-
- 730 Replies
- 146351 views
-
Last message by Eric DUPONT
View the latest post
24/11/23, 13:45A subject posted in the forum : Innovations, inventions, patents and ideas for sustainable development
-
- 13 Replies
- 7708 views
-
Last message by Janic
View the latest post
20/06/21, 15:14A subject posted in the forum : Innovations, inventions, patents and ideas for sustainable development
-
- 42 Replies
- 31203 views
-
Last message by Lilieth78
View the latest post
20/05/18, 15:32A subject posted in the forum : Innovations, inventions, patents and ideas for sustainable development
-
- 23 Replies
- 22180 views
-
Last message by Ahmed
View the latest post
27/02/17, 19:56A subject posted in the forum : Innovations, inventions, patents and ideas for sustainable development
Go back to "Innovations, inventions, patents and ideas for sustainable development"
Who is online ?
Users browsing this forum : No registered users and 91 guests