Hello
for some day I discovered traces of white in my carb (on a doping with water), it happens that it blocks the needle.chez us the water is not limestone, rather acid.
could anyone tell me what knows or brought me a solution !!!
@+
zac
carbide problem
Try to put demineralized water already ... it costs a little more expensive than tap water but it remains very affordable (0,40 Euro per liter a week ago at home)
Otherwise you can clean your carb with a product made for, or releasing at worst it should unlock your needle ...
The white traces are oxidized aluminum, no?
SixK
Otherwise you can clean your carb with a product made for, or releasing at worst it should unlock your needle ...
The white traces are oxidized aluminum, no?
SixK
0 x
Optimists invented airplanes, parachutes pessimistic. George Bernard Shaw.
Thought personal, I understand better why the big bosses invented the golden parachute.
Thought personal, I understand better why the big bosses invented the golden parachute.
hi Zac
I also have a carburettor that I made all brass that mouth also,
the small hole of the jet, I modified with a big jet with a larger air emulsion, for the wealth I play with the level of the tank which feeds the carburettor, I walk only with rainwater it passes to the through a small skidoo snowmobile fuel filter.
Andre
I also have a carburettor that I made all brass that mouth also,
the small hole of the jet, I modified with a big jet with a larger air emulsion, for the wealth I play with the level of the tank which feeds the carburettor, I walk only with rainwater it passes to the through a small skidoo snowmobile fuel filter.
Andre
0 x
-
- Similar topics
- Replies
- views
- Last message
-
- 5 Replies
- 7318 views
-
Last message by Flytox
View the latest post
01/03/09, 22:05A subject posted in the forum : Water injection in heat engines: information and explanations
-
- 6 Replies
- 13843 views
-
Last message by jime
View the latest post
06/05/08, 12:26A subject posted in the forum : Water injection in heat engines: information and explanations
-
- 38 Replies
- 34233 views
-
Last message by Christophe
View the latest post
01/01/09, 14:55A subject posted in the forum : Water injection in heat engines: information and explanations
-
- 14 Replies
- 11995 views
-
Last message by Thibounet
View the latest post
03/03/07, 11:44A subject posted in the forum : Water injection in heat engines: information and explanations
-
- 1 Replies
- 6063 views
-
Last message by PITMIX
View the latest post
03/11/05, 22:43A subject posted in the forum : Water injection in heat engines: information and explanations
Go back to "Water injection in heat engines: information and explanations"
Who is online ?
Users browsing this forum : No registered users and 155 guests