currently being planned at the BRUZ school of environmental professions
I would like information to size
a motor pantonne on a generator of small power -1Kw
and if there are already systems to realize with the dimmenssion.
please
Length
-
- I discovered econologic
- posts: 2
- Registration: 08/12/04, 09:23
-
- I discovered econologic
- posts: 2
- Registration: 08/12/04, 09:23
the more the length of the reactor is increased, the more the engine forces; except if we associate the air flow of the air filter, the air flow of the bubbler and the flow of exhaust gases in the bubbler and also the engine demand for air ...
I saw montages with rods between 20 and 30 cm and I should meet someone who uses much smaller ... to follow.
I saw montages with rods between 20 and 30 cm and I should meet someone who uses much smaller ... to follow.
0 x
-
- Moderator
- posts: 79322
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 11043
for me the length of the reactor is not that important ... 15 to 30 cm depending on the power of the engine. All in all, given the lack of feedback (80% of people do not give a detailed report to the community. I THANK YOU VERY THOROUGHLY, guys!) ... It's quite tricky to have a precise answer. Finally here is mine.
0 x
Do a image search or an text search - Netiquette of forum
Here is a link that will surely make you happy (and for which I do not guarantee the accuracy of the data provided):forums/viewsujet.php?t=25 'target =' _ blank '> http://kidlogis.com/pmc/forums/viewsujet.php?t=25
Give us news of your experiences;)
panting,
Give us news of your experiences;)
panting,
0 x
Dream is real freedom, it is the hope, nobody can stop you.
-
- Moderator
- posts: 79322
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 11043
mmm interesting! I would like to know what data these calculations are based on.
I look in more detail and keep you posted!
I look in more detail and keep you posted!
0 x
Do a image search or an text search - Netiquette of forum
- Jean-Francois
- I understand econologic
- posts: 85
- Registration: 27/11/04, 00:18
- Location: Poitiers in the Vienne
Good evening
for the spreadsheet ....... with my 160 horsepower motor .... I'm in a bad mood: huh: so I'm going to stick to my realization with 4 reactors and 200mm rods suspended
And I would try different lengths since in the assembly that I make the rods will be quite accessible and easily dismountable
On the other hand Christophe I would give the maximum of impressions that I could provide: conso-Vmax compared to the origin-and qq times if I have the occasion with the differences between the original line and the pantone line ( because I am redesigning myself a complete exhaust for that and I am running out of time because of my job)
By cons I think at the beginning I will try to rotate the pantone circuit by trying to delay as much as possible the opening of the intake throttle (petrol injection engine)
veiled voilou
for the spreadsheet ....... with my 160 horsepower motor .... I'm in a bad mood: huh: so I'm going to stick to my realization with 4 reactors and 200mm rods suspended
And I would try different lengths since in the assembly that I make the rods will be quite accessible and easily dismountable
On the other hand Christophe I would give the maximum of impressions that I could provide: conso-Vmax compared to the origin-and qq times if I have the occasion with the differences between the original line and the pantone line ( because I am redesigning myself a complete exhaust for that and I am running out of time because of my job)
By cons I think at the beginning I will try to rotate the pantone circuit by trying to delay as much as possible the opening of the intake throttle (petrol injection engine)
veiled voilou
0 x
jeff me born with a rod in one hand and a welding station in the other :-)
... ______
... / ______ \
. (00 00 = H =)
..IiI "" "" "" III Vraoummm .. !!!!!
... ______
... / ______ \
. (00 00 = H =)
..IiI "" "" "" III Vraoummm .. !!!!!
- Jean-Francois
- I understand econologic
- posts: 85
- Registration: 27/11/04, 00:18
- Location: Poitiers in the Vienne
good evening mobyleX
My engine is a 4-cylinder 2litres 16S or rather the SR20DE nissan type I thought of making one reactor per cylinder but with the phenomena of back pressure I gave up so I am going to house everything close to the collector (it is a 3Y) and since it is made of stainless steel and quite well designed for an original part I did not want to touch it too much except that I will put thermotech there to insulate it
Otherwise for the results ..... no problem ..... I would give my opinion: rolleyes: and since the car goes to control in May I would not forget my digital to take a picture of the screen of the hehe analyzer: rolleyes:
veiled voilou
My engine is a 4-cylinder 2litres 16S or rather the SR20DE nissan type I thought of making one reactor per cylinder but with the phenomena of back pressure I gave up so I am going to house everything close to the collector (it is a 3Y) and since it is made of stainless steel and quite well designed for an original part I did not want to touch it too much except that I will put thermotech there to insulate it
Otherwise for the results ..... no problem ..... I would give my opinion: rolleyes: and since the car goes to control in May I would not forget my digital to take a picture of the screen of the hehe analyzer: rolleyes:
veiled voilou
0 x
jeff me born with a rod in one hand and a welding station in the other :-)
... ______
... / ______ \
. (00 00 = H =)
..IiI "" "" "" III Vraoummm .. !!!!!
... ______
... / ______ \
. (00 00 = H =)
..IiI "" "" "" III Vraoummm .. !!!!!
Go back to "Water injection in heat engines: information and explanations"
Who is online ?
Users browsing this forum : No registered users and 112 guests