Water doping

Water injection in thermal engines and the famous "pantone engine". General informations. Press clippings and videos. Understanding and scientific explanations on the injection of water into engines: ideas for assemblies, studies, physico-chemical analyzes.
User avatar
Cuicui
Econologue expert
Econologue expert
posts: 3547
Registration: 26/04/05, 10:14
x 6




by Cuicui » 24/10/05, 02:33

Could not those who do not yet have the courage to modify the exhaust of their car consider, at first, to have the gas sucked in by the intake coming directly from a water bubbler?
Wouldn't this system already improve engine performance a little?
It could of course be further improved by inserting a Pantone reactor in the circuit which recovers calories from the exhaust.
What do you think: blink :?
0 x
Christophe
Moderator
Moderator
posts: 79120
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10973




by Christophe » 24/10/05, 08:32

See the part: water injection in engines

article https://www.econologie.com/par-daimler-b ... es-84.html

and the following
Last edited by Christophe the 03 / 04 / 15, 12: 05, 1 edited once.
0 x
User avatar
PITMIX
Pantone engine Researcher
Pantone engine Researcher
posts: 2028
Registration: 17/09/05, 10:29
x 17




by PITMIX » 24/10/05, 21:03

Hello
If I understood correctly the addition of water with etanol made it possible to boost the engines without risk of detonation but the candles took a blow.
I am wrong ?
0 x
Other
Pantone engine Researcher
Pantone engine Researcher
posts: 3787
Registration: 17/03/05, 02:35
x 12




by Other » 24/10/05, 21:47

Hello,
ethanol, like alcohol c, is an antidetonant, so mixing with petrol it increases the compression ratio and delays self-ignition.
the rain of water in the intake of an engine, by evaporation, this lowers the temperature of the air entering the engine, therefore increasing its mass, so the engine is able to eat it plus (in weight) the fact that it is colder it also delays auto-ignition, because it is not only due to the anti-knocking property of the fuel, but also of the temperature at the end of compression of the mass of the mixture.
With a reactor powered by 100% pantone even fueled with diesel
or kerosene, it does not ignite, at least with the petrol engines that I have tried, You should try with a high compression cylinder head to see how far it can go.
Andre
0 x

 


  • Similar topics
    Replies
    views
    Last message

Go back to "Water injection in heat engines: information and explanations"

Who is online ?

Users browsing this forum : No registered users and 132 guests