Injecting water into the engine, reforming particles, Nox, CO

Water injection in thermal engines and the famous "pantone engine". General informations. Press clippings and videos. Understanding and scientific explanations on the injection of water into engines: ideas for assemblies, studies, physico-chemical analyzes.
User avatar
Macro
Econologue expert
Econologue expert
posts: 6459
Registration: 04/12/08, 14:34
x 1610




by Macro » 19/08/09, 08:53

Taking a pump lava pharec is beefier ... Only problem it warm enormously in continuous use ... That of my daihatsu rocky 40mn held to pump into a stream to clean the radiators of a band of hikers 4x4 who were in a muddy ford too deep ... It still works but I am mas on continuous that it takes hours.
For gas pumps like golf GTI and Co. ... the rotor the brooms are immersed in the liquid ... And the water is more conductive than the hydrocarbons ... It makes them heat up and they shoot in very light time and more they are very expensive ... I think it should seek at the camper ...
0 x
User avatar
Capt_Maloche
Moderator
Moderator
posts: 4559
Registration: 29/07/06, 11:14
Location: Ile-de-France
x 42




by Capt_Maloche » 19/08/09, 10:02

I suppose you have already tested petrol pumps with water ... but I am surprised that the 12v "coals" are directly in the petrol

Side pumps not too expensive there is this: http://www.conrad.fr/pompe_a_engrenage_ ... s&ns_fee=0 the pressure is not indicated :? flow 1.8L / mn and pressure surely lower than 1bar ... not glop
0 x
"Consumption is similar to a search consolation, a way to fill a growing existential void. With, the key, a lot of frustration and a little guilt, increasing the environmental awareness." (Gérard Mermet)
OUCH, OUILLE, OUCH, AAHH! ^ _ ^
User avatar
Macro
Econologue expert
Econologue expert
posts: 6459
Registration: 04/12/08, 14:34
x 1610




by Macro » 19/08/09, 10:17

A buddy tried this pump for the HV on his car she held ten minutes ...
0 x
User avatar
Macro
Econologue expert
Econologue expert
posts: 6459
Registration: 04/12/08, 14:34
x 1610




by Macro » 19/08/09, 10:22

0 x
User avatar
Macro
Econologue expert
Econologue expert
posts: 6459
Registration: 04/12/08, 14:34
x 1610




by Macro » 19/08/09, 10:26

It seems more suitable because planned to turn up to 10hours continuous but more expensive ... 3.8 bars

http://www.apolobamba-energy.com/boutiq ... fr&num=211
0 x
User avatar
Capt_Maloche
Moderator
Moderator
posts: 4559
Registration: 29/07/06, 11:14
Location: Ile-de-France
x 42




by Capt_Maloche » 19/08/09, 13:27

AH yes, the second seems to me not too bad, thank you :D
0 x
"Consumption is similar to a search consolation, a way to fill a growing existential void. With, the key, a lot of frustration and a little guilt, increasing the environmental awareness." (Gérard Mermet)
OUCH, OUILLE, OUCH, AAHH! ^ _ ^
Alain G
Econologue expert
Econologue expert
posts: 3044
Registration: 03/10/08, 04:24
x 3




by Alain G » 19/08/09, 14:24

Hi Capt

I found this small pump 12 volts gear at Conrad, I do not have the pressure but usually a gear pump gives a very good pressure. :D
http://www.conrad.fr/pompe_a_engrenage_ ... 385_315114
0 x
Christophe
Moderator
Moderator
posts: 79126
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10974




by Christophe » 25/08/09, 14:55

Uh generally gear pump and water do not mix if?

Pkoi not to be inspired by the marketed kit like the one bought abyssin ???
https://www.econologie.com/forums/injection- ... t5926.html

A shurflo pump costs 100 € (65 € 1er price for 3.8 bars), it goes up to more than 7 bars and you are quiet about performance and reliability!

Well, I'm going to look to buy one ...
Last edited by Christophe the 25 / 08 / 09, 15: 00, 1 edited once.
0 x
Christophe
Moderator
Moderator
posts: 79126
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10974




by Christophe » 25/08/09, 14:56

Macro wrote:There are 1.9 bars


Beware of camping campers, it is worse than the pool: ca surfacture a max!
1 x
Other
Pantone engine Researcher
Pantone engine Researcher
posts: 3787
Registration: 17/03/05, 02:35
x 12




by Other » 25/08/09, 16:04

Bonour

A small tank of 10 liters you fill 5 liters of water and you pressurize it with a small compressor 12 volts, that demand can of energy, you control the exit of water with a solenoid valve or directly the injector ..

After all is not to do a engenering for a production is to do tests of function ..
the first diesel engine worked in this principle the fuel was pressurized at high pressure
Clerget even used to presure water

Andre
1 x

 


  • Similar topics
    Replies
    views
    Last message

Go back to "Water injection in heat engines: information and explanations"

Who is online ?

Users browsing this forum : No registered users and 113 guests