okay !-)
so I would like them to indicate the circuits to be soldered for pulsed resonant HV in 12V depending on the shape of the cell (plates or tubes)!
to the fact that there is to be measured for this, the ohmic resistance of the cell? the capacity ? in water, without water?
electrolysis improved
- Capt_Maloche
- Moderator
- posts: 4559
- Registration: 29/07/06, 11:14
- Location: Ile-de-France
- x 42
In fact I'm a little like you, I suck in electronics
but go snoop around online electronics lessons
The capacitor will be formed by the plates of your electrolyser and the insulator will be water, Eleph could give us a lesson on how to determine the capacity of a condo
Speaking of which and the impressive video above, Meyer said that from 45Kv (I think) the production by electrolysis ignites
As soon as I have two seconds, I would do a montage with a car coil or a THT circuit of color TV
I'm sure the "solution / way" is in small volumes subject to THT
but go snoop around online electronics lessons
The capacitor will be formed by the plates of your electrolyser and the insulator will be water, Eleph could give us a lesson on how to determine the capacity of a condo
Speaking of which and the impressive video above, Meyer said that from 45Kv (I think) the production by electrolysis ignites
As soon as I have two seconds, I would do a montage with a car coil or a THT circuit of color TV
I'm sure the "solution / way" is in small volumes subject to THT
0 x
"Consumption is similar to a search consolation, a way to fill a growing existential void. With, the key, a lot of frustration and a little guilt, increasing the environmental awareness." (Gérard Mermet)
OUCH, OUILLE, OUCH, AAHH! ^ _ ^
OUCH, OUILLE, OUCH, AAHH! ^ _ ^
Hello everybody
and a special hello to Cyril.
I would like to intervene on this forum for a security issue which seems to me to be of prime importance. Here is a copy of what I wrote several months ago on the forum "Water engine" and to which I strongly advise you to refer for these experiments.
An important reminder:
The more or less abundant gas mixture that we obtain with our electrolyses presents a real danger!
The proportions of hydrogen and oxygen are, in fact, ideal for obtaining a mixture with violent explosive properties which can prove to be very destructive.
Although hydrogen diffuses and dilutes quickly in the atmosphere, it is therefore imperative to follow some basic safety rules and caution.
Of course, never smoke during your experiments and only proceed, in a sufficiently ventilated room, in the absence of electric flames or sparks nearby and move as far as possible from any electrical equipment.
Do not try to "store" the gas to ignite it later; for example in a syringe ... You can be sure that it will work and it will explode in your hand or in your face!
If you're trying to fuel an engine, remember that some small "four-strokes" produce a spark at the spark plug every two cycles, so one at the time of the exhaust; which is not annoying for normal operation, but with the hydrogen you are going to inject, beware of "flashback" and it will explode right up to your electrodes! Hello damage! ...
That said, with a minimum of precautions we still have a long way to experiment and so many beautiful things to discover ... So let's go safely.
Sincerely,
Beep.
and a special hello to Cyril.
I would like to intervene on this forum for a security issue which seems to me to be of prime importance. Here is a copy of what I wrote several months ago on the forum "Water engine" and to which I strongly advise you to refer for these experiments.
An important reminder:
The more or less abundant gas mixture that we obtain with our electrolyses presents a real danger!
The proportions of hydrogen and oxygen are, in fact, ideal for obtaining a mixture with violent explosive properties which can prove to be very destructive.
Although hydrogen diffuses and dilutes quickly in the atmosphere, it is therefore imperative to follow some basic safety rules and caution.
Of course, never smoke during your experiments and only proceed, in a sufficiently ventilated room, in the absence of electric flames or sparks nearby and move as far as possible from any electrical equipment.
Do not try to "store" the gas to ignite it later; for example in a syringe ... You can be sure that it will work and it will explode in your hand or in your face!
If you're trying to fuel an engine, remember that some small "four-strokes" produce a spark at the spark plug every two cycles, so one at the time of the exhaust; which is not annoying for normal operation, but with the hydrogen you are going to inject, beware of "flashback" and it will explode right up to your electrodes! Hello damage! ...
That said, with a minimum of precautions we still have a long way to experiment and so many beautiful things to discover ... So let's go safely.
Sincerely,
Beep.
0 x
- Misterloxo
- Éconologue good!
- posts: 480
- Registration: 10/02/03, 15:28
- x 1
Hi all !
So, who has done HT pulsed electrolysis tests?
For those who do not have it here is a file that would allow you to reproduce the "Ravi's Cell":
Ravi's Cell
So, who has done HT pulsed electrolysis tests?
For those who do not have it here is a file that would allow you to reproduce the "Ravi's Cell":
Ravi's Cell
0 x
Learning disobedience is a long process. It takes a lifetime to reach perfection. "Maurice Rajsfus
To think is to say no. "Alain, philosopher
To think is to say no. "Alain, philosopher
- Misterloxo
- Éconologue good!
- posts: 480
- Registration: 10/02/03, 15:28
- x 1
Capt_Maloche wrote:This could well be improved electrolysis: http://fr.youtube.com/watch?v=YYNkBKJPK4I&NR=1
I've been dreaming of doing this for a long time
it apparently only has a THT TV coil and a 12V battery
I invited him on the forum:Capt-Maloche wrote:ChrisPCrunchy
subject: your video on http://fr.youtube.com/user/ChrisPCrunchy
Hello,
I'm writing from France ^ _ ^
I'am an "Econologue" on web site: https://www.econologie.com/forums/post85450.html#85450 , me and some others are searching a mean to improve electrolysis of water, and i saw your video.
Can you tell us if you have mounted this process on a car?
Can you participate in our forum?
Can you tell us what are the details to reproduce it?
Thank you for your response
Pascal
In the same genre as ChrisPCrunchy, an impressive video of Aaron: http://www.youtube.com/watch?v=_bWZR52DINc
But, in my opinion it's anything but electrolysis ...
0 x
Learning disobedience is a long process. It takes a lifetime to reach perfection. "Maurice Rajsfus
To think is to say no. "Alain, philosopher
To think is to say no. "Alain, philosopher
oh well it looks like it is going!
always the replica of dave lawton, apparently it was good then ...
you did see ? :
http://www.thehydrogenshop.com/
always the replica of dave lawton, apparently it was good then ...
you did see ? :
http://www.thehydrogenshop.com/
0 x
- wirbelwind262
- Éconologue good!
- posts: 238
- Registration: 29/06/05, 11:58
- Location: Fouras
- x 29
Hello
Has anyone used a (see more) Tesla coil to power the electrodes of the electrolyser?
I have quite simple pulse generator plans:
http://www.electronique-inedite.fr/liste%202.html
Good luck!
Has anyone used a (see more) Tesla coil to power the electrodes of the electrolyser?
I have quite simple pulse generator plans:
http://www.electronique-inedite.fr/liste%202.html
Good luck!
0 x
- Capt_Maloche
- Moderator
- posts: 4559
- Registration: 29/07/06, 11:14
- Location: Ile-de-France
- x 42
Here are for sure people who know how to sell
and to do a good job, you need this: http://www.france-elec.com/annuaire/gen ... _n814.html and that http://www.neomore.com/Oscillo_acquisit ... uwodhjaKwQ
0 x
"Consumption is similar to a search consolation, a way to fill a growing existential void. With, the key, a lot of frustration and a little guilt, increasing the environmental awareness." (Gérard Mermet)
OUCH, OUILLE, OUCH, AAHH! ^ _ ^
OUCH, OUILLE, OUCH, AAHH! ^ _ ^
-
- Econologue expert
- posts: 4075
- Registration: 12/01/07, 08:18
- x 4
-
- Similar topics
- Replies
- views
- Last message
-
- 1 Replies
- 10980 views
-
Last message by elephant
View the latest post
04/05/13, 16:45A subject posted in the forum : special motors, patents, fuel consumption reduction
-
- 248 Replies
- 42167 views
-
Last message by GuyGadeboisTheBack
View the latest post
04/12/23, 20:56A subject posted in the forum : special motors, patents, fuel consumption reduction
-
- 59 Replies
- 40501 views
-
Last message by elephant
View the latest post
16/11/08, 17:49A subject posted in the forum : special motors, patents, fuel consumption reduction
-
- 13 Replies
- 30595 views
-
Last message by Christophe
View the latest post
01/12/08, 21:30A subject posted in the forum : special motors, patents, fuel consumption reduction
-
- 11 Replies
- 16860 views
-
Last message by zac
View the latest post
07/12/06, 21:22A subject posted in the forum : special motors, patents, fuel consumption reduction
Back to "Special motors, patents, fuel consumption reduction"
Who is online ?
Users browsing this forum : No registered users and 237 guests