The people of the WEST and BRETAGNE (BZH !!) and Pays de la Loire can organize here!
Thank you indicate in the 1er message:
- Your exact location
- The means (human financial equipment) you want to bring the building
- At what level you want to intervene in the "union"
- Remember to think of your friends who have may be no access to internet and speak on their behalf.
Pantone engine in the Greater West and Brittany Region
-
- Moderator
- posts: 79126
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 10974
Pantone engine in the Greater West and Brittany Region
Last edited by Christophe the 16 / 05 / 13, 10: 02, 4 edited once.
0 x
Do a image search or an text search - Netiquette of forum
Hello,
I am a computer technician, programmer from time to time
My skills that can bring more to the project are limited, but I am motivated.
The main constraint for me is money, because I have no side to help R & D ...
Level time, it can work out.
I add that I have a fairly important learning ability. When I started looking at the PMC, I did not know anything about engines. A few months later, without being an expert, I understand what I am talking about and I can give my opinion ...
I posted this also in the general thread. I am from Nantes. I am 26 years old.
Seb.
I am a computer technician, programmer from time to time
My skills that can bring more to the project are limited, but I am motivated.
The main constraint for me is money, because I have no side to help R & D ...
Level time, it can work out.
I add that I have a fairly important learning ability. When I started looking at the PMC, I did not know anything about engines. A few months later, without being an expert, I understand what I am talking about and I can give my opinion ...
I posted this also in the general thread. I am from Nantes. I am 26 years old.
Seb.
0 x
Hi, I'm in the center of Reindeer.
I have a redone engine "1600cc" of cox, purposely to install pantone.
I have a welding machine, etc etc ... But I need a little help to make the adaptation.
For people who are interested, there is an organic fair on Sunday, November 21, in Pontorson (50Km of reindeer), Mr Dubourg should exhibit his Renault Express there (experience n ° 41 on Quanthomme.org: http: // quanthomme. free.fr/pantone/realisat.../FrancePMC5.htm )
Good evening to all,
Adrien
I have a redone engine "1600cc" of cox, purposely to install pantone.
I have a welding machine, etc etc ... But I need a little help to make the adaptation.
For people who are interested, there is an organic fair on Sunday, November 21, in Pontorson (50Km of reindeer), Mr Dubourg should exhibit his Renault Express there (experience n ° 41 on Quanthomme.org: http: // quanthomme. free.fr/pantone/realisat.../FrancePMC5.htm )
Good evening to all,
Adrien
0 x
"A man who knows how to make himself happy with a simple illusion is infinitely smarter than one who is in despair with reality." Alphonse Allais
Bonjour à tous
For two years that I'm on the Pantone engine, I have often consulted the forum fr.groups.forum.com / PMC-France, and I left only three posts on this site.
It's nice to see that there are achievements in France. Thanks to the site I'm not everything
alone in my corner. But I had a lot of difficulties because I had to learn notions of
plumbing, engine blast, ... etc. Moreover it was not easy to build a bubbler
which accepts 80 to 90 degrees. I have for the moment been a consumer of messages because I
need informations. I understand Christophe Martz's joke (message
3016), but fortunately there are these messages on the forumotherwise I would have given up a long time ago.
I am in favor of Christophe Martz's proposal for a national federation
local associations. I am ready to join even financially. We will have many more results by being grouped together. I work in telecommunications and I am handyman.
I live in the department of Sarthe.
I talked a lot about the Pantone engine around me. Some helped me by giving me some material or notions but are not part of it.
I pummeled a first-rate generator, but unfortunately the launcher, the carburetor mount, and the alternator were defective one after the other.
I now have a car alternator running with an old engine
self-propelled dowel techuchem pantonned .Ca works but I have not had time yet
to do a lot of tests for fuel consumption comparisons with carburetion
of origin and with the Pantone reactor. In any case the difference in pollution is clear in
favor of the Pantone engine.
I would also like to experiment with oil, but
what should be the temperature of the oil in the bubbler? Are there any precautions to take?
After doing enough tests, it will be my turn to send you my information and results.
By the way, at which internet address is it possible for me to send my project with
comments and the picture of my engine pantonnisé?
28 / 11 / 04 See you soon from me.
For two years that I'm on the Pantone engine, I have often consulted the forum fr.groups.forum.com / PMC-France, and I left only three posts on this site.
It's nice to see that there are achievements in France. Thanks to the site I'm not everything
alone in my corner. But I had a lot of difficulties because I had to learn notions of
plumbing, engine blast, ... etc. Moreover it was not easy to build a bubbler
which accepts 80 to 90 degrees. I have for the moment been a consumer of messages because I
need informations. I understand Christophe Martz's joke (message
3016), but fortunately there are these messages on the forumotherwise I would have given up a long time ago.
I am in favor of Christophe Martz's proposal for a national federation
local associations. I am ready to join even financially. We will have many more results by being grouped together. I work in telecommunications and I am handyman.
I live in the department of Sarthe.
I talked a lot about the Pantone engine around me. Some helped me by giving me some material or notions but are not part of it.
I pummeled a first-rate generator, but unfortunately the launcher, the carburetor mount, and the alternator were defective one after the other.
I now have a car alternator running with an old engine
self-propelled dowel techuchem pantonned .Ca works but I have not had time yet
to do a lot of tests for fuel consumption comparisons with carburetion
of origin and with the Pantone reactor. In any case the difference in pollution is clear in
favor of the Pantone engine.
I would also like to experiment with oil, but
what should be the temperature of the oil in the bubbler? Are there any precautions to take?
After doing enough tests, it will be my turn to send you my information and results.
By the way, at which internet address is it possible for me to send my project with
comments and the picture of my engine pantonnisé?
28 / 11 / 04 See you soon from me.
0 x
-
- Moderator
- posts: 79126
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 10974
Retroloc wrote:erikotiti wrote:Pantone. In any case the difference in pollution is clear in favor of the Pantone engine.
NUMBERS ! Please...
Grrr: angry: -> https://www.econologie.com/forums/moteur-pan ... vt252.html
I thought I was explicit?
0 x
Do a image search or an text search - Netiquette of forum
The 04 / 09 / 05, we have (pascal and me) exhibited 2 engines at the foire d 'Bouloire en Sarthe.
the 02 / 10 / 05, at an open door in an organic farm in Sarthe, there was our 2 engines and a
pantonised tractor. In addition, the 04 / 09 / 05, we did with ADEAS-CIVAM advertising for the open door.
I was surprised to see the number of people interested in the Pantone system.
There are also anonymous groups who are trained on this subject.
Having exposed me allowed me to know other people from Sarthe and its surroundings allowing me to create contacts.
IN BRIEF: THE PANTONE MOTOR MAKES EMULES IN SARTHE !!
the 02 / 10 / 05, at an open door in an organic farm in Sarthe, there was our 2 engines and a
pantonised tractor. In addition, the 04 / 09 / 05, we did with ADEAS-CIVAM advertising for the open door.
I was surprised to see the number of people interested in the Pantone system.
There are also anonymous groups who are trained on this subject.
Having exposed me allowed me to know other people from Sarthe and its surroundings allowing me to create contacts.
IN BRIEF: THE PANTONE MOTOR MAKES EMULES IN SARTHE !!
0 x
-
- Similar topics
- Replies
- views
- Last message
-
- 6 Replies
- 8760 views
-
Last message by denis
View the latest post
08/07/19, 15:09A subject posted in the forum : Water injection in engines: montages and experiments
-
- 5 Replies
- 13099 views
-
Last message by Flytox
View the latest post
06/11/17, 23:41A subject posted in the forum : Water injection in engines: montages and experiments
-
- 6 Replies
- 11010 views
-
Last message by gildas
View the latest post
30/03/17, 09:10A subject posted in the forum : Water injection in engines: montages and experiments
-
- 27 Replies
- 29211 views
-
Last message by chatelot16
View the latest post
31/07/16, 11:00A subject posted in the forum : Water injection in engines: montages and experiments
-
- 3 Replies
- 8437 views
-
Last message by jrneco
View the latest post
11/03/16, 20:29A subject posted in the forum : Water injection in engines: montages and experiments
Back to "Water injection in the engines: the assembly and experimentation"
Who is online ?
Users browsing this forum : No registered users and 147 guests