Hello,
I would like to modify my mower for water doping,
I found various plans on various sites, but each time the plans are very average, by hand, or imprecise, with non French units, thumb, etc ...
does anyone have a plan to simply perform this installation? with the list of parts with French dimensions easily found in France?
thank you in advance,
arnp
Council for realization mower
-
- Moderator
- posts: 79117
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 10972
hi you don't have to have the right dimensions of the roughly it does anyway. To convert measurements
http://people.virginia.edu/~rmf8a/convert-FR.html
http://people.virginia.edu/~rmf8a/convert-FR.html
darno wrote:Well yes I saw that but everything is in inches, the pieces I wonder if they can be found in France ...
0 x
Hello
For the unnecessary measures to fight with the measures
find a roof a reactor tube and a steel rod which has a clearance of 0,8mm to 1,2mm all around, the length is tolerant from 180mm to 300mm, all wrap in a conduit to pass the exhaust
Normally the ducts are universal, take 1/2 inch pipe for the reactor and 1 inch pipe for the envelope
Do not try to convert the measures the pipes in France are the same dimensions as the pipes in America
for once something is universal (like 14mm spark plugs)
Andre
For the unnecessary measures to fight with the measures
find a roof a reactor tube and a steel rod which has a clearance of 0,8mm to 1,2mm all around, the length is tolerant from 180mm to 300mm, all wrap in a conduit to pass the exhaust
Normally the ducts are universal, take 1/2 inch pipe for the reactor and 1 inch pipe for the envelope
Do not try to convert the measures the pipes in France are the same dimensions as the pipes in America
for once something is universal (like 14mm spark plugs)
Andre
0 x
-
- Similar topics
- Replies
- views
- Last message
-
- 25 Replies
- 23720 views
-
Last message by Other
View the latest post
19/03/10, 03:11A subject posted in the forum : Water injection in engines: montages and experiments
-
- 5 Replies
- 6615 views
-
Last message by jime
View the latest post
15/06/08, 06:36A subject posted in the forum : Water injection in engines: montages and experiments
-
- 14 Replies
- 13638 views
-
Last message by jonule
View the latest post
27/11/07, 11:00A subject posted in the forum : Water injection in engines: montages and experiments
Back to "Water injection in the engines: the assembly and experimentation"
Who is online ?
Users browsing this forum : No registered users and 191 guests