GTI to oneself
- elephant
- Econologue expert
- posts: 6646
- Registration: 28/07/06, 21:25
- Location: Charleroi, center of the world ....
- x 7
usually component dealers have equivalence tables
already collecting the datsheet
already collecting the datsheet
0 x
elephant Supreme Honorary éconologue PCQ ..... I'm too cautious, not rich enough and too lazy to really save the CO2! http://www.caroloo.be
in priroi, we should find:
75V / 80a,
RDS (ON) = 8mΩ
VGS = 10V
IDS = 40A
Common Ratings (TA = 25 ° C Unless Otherwise Noted)
VDSS Drain-Source Voltage 75 V
VGSS Gate-Source Voltage ± 25 V
TJ Maximum Junction Temperature 175 ° C
TSTG Storage Temperature Range -55 to 175 ° C
IS Diode Continuous Forward Current TC = 25 ° C 80 A
75V / 80a,
RDS (ON) = 8mΩ
VGS = 10V
IDS = 40A
Common Ratings (TA = 25 ° C Unless Otherwise Noted)
VDSS Drain-Source Voltage 75 V
VGSS Gate-Source Voltage ± 25 V
TJ Maximum Junction Temperature 175 ° C
TSTG Storage Temperature Range -55 to 175 ° C
IS Diode Continuous Forward Current TC = 25 ° C 80 A
0 x
In 10s google gives nothing (digikey)
The pleasure of Chinese components to buy in Hong Kong.
Just about any fast power MOSFET N similar to V max 75V, VGmax 25V, Pmax 240W, 80A, RDSon 6 to 8mOhms, tOn 15ms toff 70ms, similar while also checking the rest.
http://pdf1.alldatasheet.fr/datasheet-p ... 5N08R.html
after search on IRF
https://ec.irf.com/v6/en/US/adirect/ir? ... 4294873522
the IRFB3307ZG should not be too different.
In my opinion it is better to redesign in part according to the available components, with good margin, instead of copying and searching for the components that cannot be found.
See Forhorse who often burns them.
The pleasure of Chinese components to buy in Hong Kong.
Just about any fast power MOSFET N similar to V max 75V, VGmax 25V, Pmax 240W, 80A, RDSon 6 to 8mOhms, tOn 15ms toff 70ms, similar while also checking the rest.
http://pdf1.alldatasheet.fr/datasheet-p ... 5N08R.html
after search on IRF
https://ec.irf.com/v6/en/US/adirect/ir? ... 4294873522
the IRFB3307ZG should not be too different.
In my opinion it is better to redesign in part according to the available components, with good margin, instead of copying and searching for the components that cannot be found.
See Forhorse who often burns them.
0 x
Back to "hydraulic, wind, geothermal, marine energy, biogas ..."
Who is online ?
Users browsing this forum : No registered users and 271 guests