Free electricity generation

Innovations, ideas or patents for sustainable development. Decrease in energy consumption, reduction of pollution, improvement of yields or processes ... Myths or reality about inventions of the past or the future: the inventions of Tesla, Newman, Perendev, Galey, Bearden, cold fusion ...
User avatar
King arthur 525
I learn econologic
I learn econologic
posts: 26
Registration: 05/03/12, 19:14
Location: BOURMONT 52




by King arthur 525 » 25/04/12, 19:41

I especially see that I have been told a lot of times that my wheel would not spin an inch! :x
Here I am already about 5 cm and it stops only because I no longer have enough magnets. This is how I see things ..
Criticism is easy, but I have already done more than what some evil spirits thought! : Cheesy:

To be continued ...
0 x
The freedom of women begins where that of men ends.
User avatar
Forhorse
Econologue expert
Econologue expert
posts: 2485
Registration: 27/10/09, 08:19
Location: Perche Ornais
x 359




by Forhorse » 25/04/12, 20:05

Do you call it spinning? oh well it's okay, you're happy with little : Mrgreen:
I was doing the same in kindergarten when I discovered the "magical" power of magnets.
0 x
User avatar
plasmanu
Econologue expert
Econologue expert
posts: 2847
Registration: 21/11/04, 06:05
Location: The 07170 Lavilledieu viaduct
x 180




by plasmanu » 25/04/12, 20:14

Forhorse wrote:I was doing the same in kindergarten when I discovered the "magical" power of magnets.


I had a flash in 5th when we ran an engine with a dynamo.

But ... So ... the other way ... it's possible ... Haaa no ... Damn ... Too bad ...
0 x
"Not to see Evil, not to hear Evil, not to speak Evil" 3 little monkeys Mizaru
User avatar
Forhorse
Econologue expert
Econologue expert
posts: 2485
Registration: 27/10/09, 08:19
Location: Perche Ornais
x 359




by Forhorse » 25/04/12, 20:18

In theory, all rotating electrical machines are reversible. But for some it is more complicated than for others, and the performance is not always great.
But for the moment I do not know of any machine which does not depart from this rule.
0 x
User avatar
King arthur 525
I learn econologic
I learn econologic
posts: 26
Registration: 05/03/12, 19:14
Location: BOURMONT 52




by King arthur 525 » 25/04/12, 22:22

@ Forhorse: how are your ankles ?? Me my daughter in kindergarten she makes drawings, paintings, songs ... I did not know that there were kindergartens of gifted !!

Are there only haughty and limited mentalities on this forum ??
0 x
The freedom of women begins where that of men ends.
User avatar
Forhorse
Econologue expert
Econologue expert
posts: 2485
Registration: 27/10/09, 08:19
Location: Perche Ornais
x 359




by Forhorse » 25/04/12, 23:05

Modesty works both ways.
We have all told you that you would not succeed, you still try it is good, but also do not take us for idiots and believe that you are the first to achieve this result.
Thousands, even millions of people have done the same thing ... without ever succeeding in going further.
0 x
dedeleco
Econologue expert
Econologue expert
posts: 9211
Registration: 16/01/10, 01:19
x 10




by dedeleco » 26/04/12, 00:15

read past history:
http://fr.wikipedia.org/wiki/Mouvement_perp%C3%A9tuel

http://en.wikipedia.org/wiki/History_of ... n_machines

http://en.wikipedia.org/wiki/Perpetual_motion

http://quanthomme.free.fr/energielibre/machines/MVP.htm

the perpetual movement, guilty of unnecessarily consuming the talents, the time and the fortune of too many ingenious mechanics.
0 x
User avatar
Cuicui
Econologue expert
Econologue expert
posts: 3547
Registration: 26/04/05, 10:14
x 6




by Cuicui » 26/04/12, 09:50

King Arthur 525 wrote:... But I find it encouraging!

Bravo for your achievement with so few means!
Difficulty: how to make the wheel jump from one magnet to another without stopping? The experiences are pleasant, even if, so far, everyone has failed.
0 x
hub70
I discovered econologic
I discovered econologic
posts: 8
Registration: 15/03/12, 19:04




by hub70 » 26/04/12, 21:40

slt
So learn the lessons of your tests and even with other magnets it will not turn either but it is by doing experiments that you will leave on other attempts with something more elaborate, it is true that the perpetual movement have already spilled a lot of ink and it will be so for a long time, so do some research on electromagnetism, there are simple replicas to make and which will bring you maybe another vision of what you would like to do.
for information I am on a vsg for the moment with obviously of the concerns of conception, but before yesterday I smoke in exit a transformer of 180va in less than 5 seconds and the primary of the vsg as to smoke also :| , but I won't let go, you just have to start on a good basis and test, for example paul pantome certainly did not know what he was going to come out of a piece of tube and the "hay" that it was going to do for years .
All that to say that you're also on the wrong track with your "thing", imagine it's way too simple to work, and someone would have had the idea before you if we could get something out of it right?
0 x
User avatar
plasmanu
Econologue expert
Econologue expert
posts: 2847
Registration: 21/11/04, 06:05
Location: The 07170 Lavilledieu viaduct
x 180




by plasmanu » 26/04/12, 22:13

I noticed that by rotating magnets like that in a fixed thing like that. There is juice : Idea:
But without an external source it doesn't want to turn.
I screamed. I railed. Nothing works. It refuses to shoot
If someone has an idea
Image
0 x
"Not to see Evil, not to hear Evil, not to speak Evil" 3 little monkeys Mizaru

 


  • Similar topics
    Replies
    views
    Last message

Go back to "Innovations, inventions, patents and ideas for sustainable development"

Who is online ?

Users browsing this forum : No registered users and 98 guests