Other original "magnetic motor"

Innovations, ideas or patents for sustainable development. Decrease in energy consumption, reduction of pollution, improvement of yields or processes ... Myths or reality about inventions of the past or the future: the inventions of Tesla, Newman, Perendev, Galey, Bearden, cold fusion ...
Tagor
I posted 500 messages!
I posted 500 messages!
posts: 534
Registration: 06/04/07, 12:31




by Tagor » 28/02/08, 14:24

it is also something that should have sin:

Re: FBDISSM - Flux.Boosted.Dual.Induction.Split.Spiral.Motor.
"Reply #203 on: February 24, 2008, 10: 27: 22 AM" Quote

-------------------------------------------------- ------------------------------
Some calculations and observation notes:

I'd like to add that the rotor magnet has a totaly free pass at 165W input for Solenoid in the latest set of tests.
The activated Solenoid time is approx 0.25% of each full rotor and this equals 82.5 watts going into the motor.
But the calculated torque / rpm output from a motor using this size is more likely than the input.
The average torque under load is calculated to 3,13 ft-lbs

At 100 RPM under load I get = (3,13 * 2 * 3,14 * 100) / 33000 = 0,059 Hp = 44 watt output from the shaft.
At 200 RPM under load I get = (3,13 * 2 * 3,14 * 200) / 33000 = 0,119 Hp = 88 watt output from the shaft.
At 300 RPM under load I get = (3,13 * 2 * 3,14 * 300) / 33000 = 0,178 Hp = 132 watt output from the shaft.
At 400 RPM under load I get = (3,13 * 2 * 3,14 * 400) / 33000 = 0,238 Hp = 177 watt output from the shaft.
At 500 RPM under load I get = (3,13 * 2 * 3,14 * 500) / 33000 = 0,297 Hp = 222 watt output from the shaft.

You can see for yourselves. Already at 200 RPM I've got more out than in.
Do not forget how to behaves in an electrical motor.
At No Load I get Maximum RPM at Zero Torque and I'll get Maximum Torque when stalled at Zero RPM.
And there is a linear relationship between these two points.
Meaning that I'll get Half the Torque when the Free Spinning RPM is loaded to half the RPM.
And I expect to hit a lot more than 400 RPM when the Sticky Spot is passed without any momentum at all.
If I'll hit 1000 RPM at free spinning I'll get 222 watt output on the shaft when loaded down to 500 RPM.

But this is just some calculations on a small motor.
The big one I'm building to get 4500W output at 200W input.


4.5kW issued for 400W as input is impressive
Last edited by Tagor the 28 / 02 / 08, 14: 28, 1 edited once.
0 x
User avatar
quartz
I posted 500 messages!
I posted 500 messages!
posts: 640
Registration: 20/01/07, 14:38
Location: Parisian region




by quartz » 28/02/08, 14:25

Yes of course he's interested in the gentleman,

magpowersystem@free.fr

you can send me the information directly, the personal message seems to have missed !!

Big thanks to you tigrou_838

A + + +
0 x
Every minute that passes is an opportunity to change the course of your life.
YouTube page, Dailymotion page, Picasa album, personal Pages, Viktor Schauberger
User avatar
tigrou_838
I posted 500 messages!
I posted 500 messages!
posts: 573
Registration: 20/10/04, 11:25
Location: Lorraine border luxembourg

macder




by tigrou_838 » 28/02/08, 14:27

to quickly answer the person who speaks battery or accumulator, I want to specify that this engine does not need any power source to turn.
Capt_Maloche, to my knowledge, there is no coil to rotate the machine, just the same alternator to produce different voltage.
tagor, there is no patent for the gear, mr goldschmidt has never deposited anything.

of course all this under all reserve.
0 x
Tagor
I posted 500 messages!
I posted 500 messages!
posts: 534
Registration: 06/04/07, 12:31

Re: macder




by Tagor » 28/02/08, 14:31

tigrou_838 wrote:to quickly answer the person who speaks battery or accumulator, I want to specify that this engine does not need any power source to turn.
Capt_Maloche, to my knowledge, there is no coil to rotate the machine, just the same alternator to produce different voltage.
tagor, there is no patent for the gear, mr goldschmidt has never deposited anything.

of course all this under all reserve.


Good evening,

I understand your interest, but for information, I bought the rights
(The whole)
and I'm finishing this magnetic motor and the battery ...
0 x
User avatar
quartz
I posted 500 messages!
I posted 500 messages!
posts: 640
Registration: 20/01/07, 14:38
Location: Parisian region




by quartz » 28/02/08, 14:55

Harry Goldschmidt's picture 20 years ago

Image
0 x
Every minute that passes is an opportunity to change the course of your life.

YouTube page, Dailymotion page, Picasa album, personal Pages, Viktor Schauberger
User avatar
tigrou_838
I posted 500 messages!
I posted 500 messages!
posts: 573
Registration: 20/10/04, 11:25
Location: Lorraine border luxembourg

macder




by tigrou_838 » 28/02/08, 15:15

hello sir tagor.

as much for me, I was not aware that Mr. Heens had redeemed all goldschmidt's rights to this invention.

fortunately that I specify well under any reserve.
0 x
oliburn
I understand econologic
I understand econologic
posts: 181
Registration: 30/01/07, 07:59
Location: 33 Mérignac




by oliburn » 28/02/08, 16:21

JONULE said:

and that ?
ImageImage

the link :
http://overunity.ifrance.com/

Replications:
http://www.theverylastpageoftheinternet.com/research/replicate/replicate.htm
http://www.theverylastpageoftheinternet.com/ElectromagneticDev/Ron_Classen/acpower_files/gensetmenu.htm


I only ask to believe it : Cheesy:
many drawings, plans, videos hang on the web
without ever having a realization that works at 100%
he came the time or we can share everything, he came
the time or boyfriends of James Bond will be
not enough to get us all down.
I sincerely believe that humanity can not move forward
only through sharing, and without this fucking cash
come fuck the shit every time!
I do not sell anything, I give with pleasure ... : Cheesy:
and believe me if one day I find a miraculous recipe
it is with pleasure that I will give the recipe, even if
by selling it she would have brought me billions!
I know, guys like me we lock them up! : Cheesy:
but I am like that!
so, let's go, I'll be, within the limits of my knowledge and
of my means, the first to participate ...
0 x
Be your own torch, your own refuge, your own master ... "
User avatar
quartz
I posted 500 messages!
I posted 500 messages!
posts: 640
Registration: 20/01/07, 14:38
Location: Parisian region




by quartz » 28/02/08, 16:39

I agree with you oliburn, I share everything that I find,
I just discovered the Macder engine and I realize that some of the information for years and we did not do more than that.
I find this a pity I do not say that there is bad intention behind, but hey it is necessary that the information circulates.
Personally I recovered the information since barely 12h00 and I am at the head of 3 contacts More than relevant,
I am about to call the inventor as soon as possible.
hopefully we will be fixed before the weekend.

Yet I did not do much.

Sharing and generosity is our only way out.

A + + +
0 x
Every minute that passes is an opportunity to change the course of your life.

YouTube page, Dailymotion page, Picasa album, personal Pages, Viktor Schauberger
the middle
Econologue expert
Econologue expert
posts: 4075
Registration: 12/01/07, 08:18
x 4




by the middle » 28/02/08, 19:05

0 x
User avatar
elephant
Econologue expert
Econologue expert
posts: 6646
Registration: 28/07/06, 21:25
Location: Charleroi, center of the world ....
x 7




by elephant » 28/02/08, 19:20

this site has existed for a long time, does not bring much new and is poorly done (poor low-bandwidth internet users)
0 x
elephant Supreme Honorary éconologue PCQ ..... I'm too cautious, not rich enough and too lazy to really save the CO2! http://www.caroloo.be

 


  • Similar topics
    Replies
    views
    Last message

Go back to "Innovations, inventions, patents and ideas for sustainable development"

Who is online ?

Users browsing this forum : Majestic-12 [Bot] and 139 guests