Pantone engine in the Greater West and Brittany Region

Edits and changes to engines, experiences, findings and ideas.
Christophe
Moderator
Moderator
posts: 79125
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10974

Pantone engine in the Greater West and Brittany Region




by Christophe » 08/11/04, 20:57

The people of the WEST and BRETAGNE (BZH !!) and Pays de la Loire can organize here!

Thank you indicate in the 1er message:
- Your exact location
- The means (human financial equipment) you want to bring the building
- At what level you want to intervene in the "union"
- Remember to think of your friends who have may be no access to internet and speak on their behalf.
Last edited by Christophe the 16 / 05 / 13, 10: 02, 4 edited once.
0 x
lannic
I discovered econologic
I discovered econologic
posts: 4
Registration: 20/09/04, 10:59




by lannic » 08/11/04, 23:38

I am on morlaix

I have a reactor ready to run and a wreck of 405grd ready to welcome it

stay a little time and plumbing!
0 x
User avatar
krissg29
I understand econologic
I understand econologic
posts: 80
Registration: 07/11/04, 21:26
Location: Finistere center
x 2




by krissg29 » 09/11/04, 00:02

Hello

I am on the center-finistère

and I'm trying to debug the system on a VW cox
I finished the assembly this weekend and I am in the first tests <_

a+

christophe
0 x
It should not be confused and ingenious engineer
User avatar
Superform
Éconologue good!
Éconologue good!
posts: 294
Registration: 09/11/04, 14:00




by Superform » 09/11/04, 14:09

Hello,

I am a computer technician, programmer from time to time
My skills that can bring more to the project are limited, but I am motivated.

The main constraint for me is money, because I have no side to help R & D ...
Level time, it can work out.

I add that I have a fairly important learning ability. When I started looking at the PMC, I did not know anything about engines. A few months later, without being an expert, I understand what I am talking about and I can give my opinion ...

I posted this also in the general thread. I am from Nantes. I am 26 years old.
Seb.
0 x
User avatar
Adrien
I understand econologic
I understand econologic
posts: 72
Registration: 11/11/04, 22:25
Location: Britain




by Adrien » 11/11/04, 22:37

Hi, I'm in the center of Reindeer.

I have a redone engine "1600cc" of cox, purposely to install pantone.

I have a welding machine, etc etc ... But I need a little help to make the adaptation.

For people who are interested, there is an organic fair on Sunday, November 21, in Pontorson (50Km of reindeer), Mr Dubourg should exhibit his Renault Express there (experience n ° 41 on Quanthomme.org: http: // quanthomme. free.fr/pantone/realisat.../FrancePMC5.htm )

Good evening to all,

Adrien
0 x
"A man who knows how to make himself happy with a simple illusion is infinitely smarter than one who is in despair with reality." Alphonse Allais
erikotiti
I learn econologic
I learn econologic
posts: 16
Registration: 21/11/04, 22:03




by erikotiti » 29/11/04, 22:23

Bonjour à tous

For two years that I'm on the Pantone engine, I have often consulted the forum fr.groups.forum.com / PMC-France, and I left only three posts on this site.
It's nice to see that there are achievements in France. Thanks to the site I'm not everything
alone in my corner. But I had a lot of difficulties because I had to learn notions of
plumbing, engine blast, ... etc. Moreover it was not easy to build a bubbler
which accepts 80 to 90 degrees. I have for the moment been a consumer of messages because I
need informations. I understand Christophe Martz's joke (message
3016), but fortunately there are these messages on the forumotherwise I would have given up a long time ago.


I am in favor of Christophe Martz's proposal for a national federation
local associations. I am ready to join even financially. We will have many more results by being grouped together. I work in telecommunications and I am handyman.
I live in the department of Sarthe.

I talked a lot about the Pantone engine around me. Some helped me by giving me some material or notions but are not part of it.
I pummeled a first-rate generator, but unfortunately the launcher, the carburetor mount, and the alternator were defective one after the other.
I now have a car alternator running with an old engine
self-propelled dowel techuchem pantonned .Ca works but I have not had time yet
to do a lot of tests for fuel consumption comparisons with carburetion
of origin and with the Pantone reactor. In any case the difference in pollution is clear in
favor of the Pantone engine.
I would also like to experiment with oil, but
what should be the temperature of the oil in the bubbler? Are there any precautions to take?


After doing enough tests, it will be my turn to send you my information and results.
By the way, at which internet address is it possible for me to send my project with
comments and the picture of my engine pantonnisé?


28 / 11 / 04 See you soon from me.
0 x
Retroloc
I learn econologic
I learn econologic
posts: 10
Registration: 25/11/04, 16:09




by Retroloc » 30/11/04, 18:04

erikotiti wrote:Pantone. In any case the difference in pollution is clear in favor of the Pantone engine.

NUMBERS ! Please...
0 x
Christophe
Moderator
Moderator
posts: 79125
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10974




by Christophe » 01/12/04, 08:44

Retroloc wrote:
erikotiti wrote:Pantone. In any case the difference in pollution is clear in favor of the Pantone engine.

NUMBERS ! Please...

Grrr: angry: -> https://www.econologie.com/forums/moteur-pan ... vt252.html

I thought I was explicit?
0 x
Ze_Seb
I discovered econologic
I discovered econologic
posts: 2
Registration: 03/09/05, 10:34




by Ze_Seb » 13/09/05, 23:00

Me chuis south of Rennes at 30 terminals. I have not done anything yet but I would like to test on a mower engine and then on a car. For the moment, I am collecting information on the left and right on the net ...
0 x
erikotiti
I learn econologic
I learn econologic
posts: 16
Registration: 21/11/04, 22:03




by erikotiti » 05/10/05, 23:17

The 04 / 09 / 05, we have (pascal and me) exhibited 2 engines at the foire d 'Bouloire en Sarthe.
the 02 / 10 / 05, at an open door in an organic farm in Sarthe, there was our 2 engines and a
pantonised tractor. In addition, the 04 / 09 / 05, we did with ADEAS-CIVAM advertising for the open door.
I was surprised to see the number of people interested in the Pantone system.
There are also anonymous groups who are trained on this subject.

Having exposed me allowed me to know other people from Sarthe and its surroundings allowing me to create contacts.


IN BRIEF: THE PANTONE MOTOR MAKES EMULES IN SARTHE !!
0 x

 


  • Similar topics
    Replies
    views
    Last message

Back to "Water injection in the engines: the assembly and experimentation"

Who is online ?

Users browsing this forum : No registered users and 183 guests