Pantone for Peugeot 406 cut

Edits and changes to engines, experiences, findings and ideas.
Cyril56
I discovered econologic
I discovered econologic
posts: 6
Registration: 08/05/10, 17:49
Location: 56100




by Cyril56 » 21/05/10, 17:37

Hi Manoria,


Me, I sent the water with injectors controlled electronically, and I can guarantee you that it is the top of the top to be at maximum efficiency.


Yeah, that sounds good to me with an injector.

Could you give me the reference, STp?

And with what information did you fly them, the rpm? [/ Quote]

We look forward to seeing you!
0 x
User avatar
manoria68
Éconologue good!
Éconologue good!
posts: 301
Registration: 07/10/08, 12:34
Location: ATLANTIS
x 2




by manoria68 » 21/05/10, 18:00

Hello,
everything is explained here: https://www.econologie.com/forums/creation-d ... t6388.html

May for a diesel engine, I would have thought of copying the signal of the TDC to control the injection of water
0 x
Manoria 68, fried researcher, technician of its oil mill
Jean Valjean
I learn econologic
I learn econologic
posts: 26
Registration: 16/05/10, 00:01
Location: Bordeaux




by Jean Valjean » 21/05/10, 22:25

Good morning ,
manoria68 it looks super complex your system.
I will see if I arrive with my constant level, as you can see on the photo the water is much higher than the trap. why?
Image
0 x
User avatar
Flytox
Moderator
Moderator
posts: 14138
Registration: 13/02/07, 22:38
Location: Bayonne
x 839




by Flytox » 21/05/10, 22:39

Does the cover of your trap have a vent?; we do not see in the photo. If it doesn't have one it's normal, it can't work and you have to pierce one.
0 x
Reason is the madness of the strongest. The reason for the less strong it is madness.
[Eugène Ionesco]
http://www.editions-harmattan.fr/index. ... te&no=4132
Jean Valjean
I learn econologic
I learn econologic
posts: 26
Registration: 16/05/10, 00:01
Location: Bordeaux




by Jean Valjean » 21/05/10, 22:44

ok thank you nice c try tomorrow.
0 x
Cyril56
I discovered econologic
I discovered econologic
posts: 6
Registration: 08/05/10, 17:49
Location: 56100




by Cyril56 » 22/05/10, 11:24

Hi Jeanvaljean,

Look at my setup: https://www.econologie.com/forums/montage-do ... t9676.html

I added a hole in the top of the tank at constant level to recover the pressure inside my steam generator so that whatever the pressure conditions the water level in the generator is that of the level tank constant.

Good luck
0 x
User avatar
Flytox
Moderator
Moderator
posts: 14138
Registration: 13/02/07, 22:38
Location: Bayonne
x 839




by Flytox » 22/05/10, 11:55

Automatic traps, originally it is made for fixed installations. Some traps are not at all made to be shaken as in a vehicle (acceleration / braking / bumps / turning) and the float is badly guided, with too much play laterally and can damage the needle movement system. Obviously, it gets stuck half open.

To reduce the phenomenon, I glued a plastic sheet 1.5 mm thick on the inside diameter of the tank, to center the movement of the float / reduce the tank / float play. It worked less badly ..., stuck less often :frown: : Mrgreen:
0 x
Reason is the madness of the strongest. The reason for the less strong it is madness.

[Eugène Ionesco]

http://www.editions-harmattan.fr/index. ... te&no=4132
Jean Valjean
I learn econologic
I learn econologic
posts: 26
Registration: 16/05/10, 00:01
Location: Bordeaux




by Jean Valjean » 22/05/10, 15:15

I made the hole as you told me, the water does not go up anymore but it comes out through the small hole?
0 x
User avatar
manoria68
Éconologue good!
Éconologue good!
posts: 301
Registration: 07/10/08, 12:34
Location: ATLANTIS
x 2




by manoria68 » 24/05/10, 11:01

Hello,
I would have thought its for the hole.
Try to see with another auto bleed valve,
Or better yet, try with a constant level tank found in all oil stoves, old people over 20 years old ...
In addition, I have one in my archives : Cheesy:
A+
0 x
Manoria 68, fried researcher, technician of its oil mill
User avatar
Flytox
Moderator
Moderator
posts: 14138
Registration: 13/02/07, 22:38
Location: Bayonne
x 839




by Flytox » 24/05/10, 11:51

Your needle is blocked half open .... take it apart to see what is blocking it. And stay patient, chai plus what Pantomiste had told on the money that he had ended up with a big anger and swung his trap with rage in a ditch or something like that he was delighted with the operation ... : Mrgreen:
0 x
Reason is the madness of the strongest. The reason for the less strong it is madness.

[Eugène Ionesco]

http://www.editions-harmattan.fr/index. ... te&no=4132

 


  • Similar topics
    Replies
    views
    Last message

Back to "Water injection in the engines: the assembly and experimentation"

Who is online ?

Users browsing this forum : No registered users and 134 guests