If I understood correctly, I reduce the air intake at the air filter inlet
and I put the hose out of the jar.
Is it this?
Vacuum point on Volkswagen 1600 diesel engine
All the air ducts downstream of the restriction see their depression increase.
Then you choose where you open your pipe from the bubbler (always after the restriction).
- If you come out in front of the air filter, he may not like the water / steam too much.
- Just after the air filter it is possible and it allows to homogenize a minimum the vapor / air mixture for the 4 cylinders. Possible drawback, if the path is "long" (greater than 40cm?) And at low temperature (less than 45-50 °?), There may be condensation and accumulation in a low point depending on the shape of your tone intake manifold. This can possibly be dangerous for the engine if it swallows the fleet suddenly!
- You can divide your pipe to have 4 pipes which arrive directly near the cylinder head. This is the solution I use without being able to guarantee that it is the best solution for the architecture of my engine or in general ...
- If you have an EGR valve, you can connect to the valve outlet pipe just before it goes into the intake manifold.
- Etc ....
Then you choose where you open your pipe from the bubbler (always after the restriction).
- If you come out in front of the air filter, he may not like the water / steam too much.
- Just after the air filter it is possible and it allows to homogenize a minimum the vapor / air mixture for the 4 cylinders. Possible drawback, if the path is "long" (greater than 40cm?) And at low temperature (less than 45-50 °?), There may be condensation and accumulation in a low point depending on the shape of your tone intake manifold. This can possibly be dangerous for the engine if it swallows the fleet suddenly!
- You can divide your pipe to have 4 pipes which arrive directly near the cylinder head. This is the solution I use without being able to guarantee that it is the best solution for the architecture of my engine or in general ...
- If you have an EGR valve, you can connect to the valve outlet pipe just before it goes into the intake manifold.
- Etc ....
0 x
Reason is the madness of the strongest. The reason for the less strong it is madness.
[Eugène Ionesco]
http://www.editions-harmattan.fr/index. ... te&no=4132
[Eugène Ionesco]
http://www.editions-harmattan.fr/index. ... te&no=4132
You could show us / explain your montage more fully and tell us about your bubbler ...
A+
A+
0 x
Reason is the madness of the strongest. The reason for the less strong it is madness.
[Eugène Ionesco]
http://www.editions-harmattan.fr/index. ... te&no=4132
[Eugène Ionesco]
http://www.editions-harmattan.fr/index. ... te&no=4132
Thank you for your information Fytox
For what concerns my bubbler it is for the moment a simple jar in which I put a hose up to 1cm from the bottom,
before leaving and water. Before doing more, I must find this point of depression in 1st.
This weekend I plugged the air filter inlet and the pipe in half
at the outlet of the jar was in the air filter box but under the filter then for a second test at the air filter inlet. But I still don't have a depression, even though I can feel the suction at the inlet of the air filter a little with my hand.
For what concerns my bubbler it is for the moment a simple jar in which I put a hose up to 1cm from the bottom,
before leaving and water. Before doing more, I must find this point of depression in 1st.
This weekend I plugged the air filter inlet and the pipe in half
at the outlet of the jar was in the air filter box but under the filter then for a second test at the air filter inlet. But I still don't have a depression, even though I can feel the suction at the inlet of the air filter a little with my hand.
0 x
- Lietseu
- Econologue expert
- posts: 2327
- Registration: 06/04/07, 06:33
- Location: Antwerp Belgium, Skype lietseu1
- x 3
Christmas truce requires, I think you will have to wait a bit to get an answer
So I wish you and all of you who read this:
HAPPY HOLIDAYS AND HAPPY NEW YEAR 2010
Meow
So I wish you and all of you who read this:
HAPPY HOLIDAYS AND HAPPY NEW YEAR 2010
Meow
0 x
By removing Human Nature, he was far from his nature! Lietseu
"The power of love, must be stronger than the love of power" contemporary Lie Tzu?
One sees clearly only with the heart, the essential is invisible to the eyes ...
"The power of love, must be stronger than the love of power" contemporary Lie Tzu?
One sees clearly only with the heart, the essential is invisible to the eyes ...
-
- I learn econologic
- posts: 23
- Registration: 07/01/08, 13:25
-
- I learn econologic
- posts: 23
- Registration: 07/01/08, 13:25
erikotiti wrote:what is a lifetime pump?
on which vehicle can we find it?
vacuum pump excuse me
These are pumps commonly used on cars (braking, recycling valve, horn ...) all this works by suction
They allow air to be extracted from a circuit.
the link of a 205 pump working with a belt ... it must exist in electric:
http://www.priceminister.com/offer/buy/ ... iesel.html
in your case, you would have all the necessary depression to operate your system
0 x
-
- Similar topics
- Replies
- views
- Last message
-
- 1 Replies
- 4402 views
-
Last message by PITMIX
View the latest post
25/07/07, 07:07A subject posted in the forum : Water injection in heat engines: information and explanations
Go back to "Water injection in heat engines: information and explanations"
Who is online ?
Users browsing this forum : No registered users and 189 guests