wood pellet stove and underfloor heating

[casalanis]

Can you send it to me in MP?

[Philippe Schutt]

I think it is not useful to clutter the server with this kind of file. If you have an email address where I can send it, it will be better

[casalanis]

catserge@hotmail.com

[Christophe]

Avoid putting your emails in "clear" on the forum because of the "robot collectors" for spam ...

I think on the contrary that a manual for a hydro stove can be interesting for others ... Philippe you can use our host if it is in .pdf ... But it must be on the EdilKamin site right?

Besides on this subject, next week I hope to find the time to make a "pellet stove" file like the one made for pellet boilers so if you have info as a pro?

[casalanis]

ok, mail only in MP ...

[Philippe Schutt]

Edilkamin is very sales and design oriented. on the other hand, on the technical side, it is better to be a little autonomous. Their site is pretty but not very explicit. I prefer mine, even if it has not yet been completed.
I sent the file to casalanis. As for putting it on the host, is there a section where you would like to see it?
Do you already have an article plan on stoves? I'm leaving Monday for a week in the mountains, walking and having a cup of water (thalassotherapy), so I may have time to work a little for you;)
Besides I come back from the Verona fair, where I saw some interesting novelties ...

[casalanis]

Ok well received, but I already had this one in color. . . I thought there was a richer one ...
One of these four I would put that of the mcz, but hey it is at least 80 pages. . . how to do ?

[Philippe Schutt]

80 pages!
in 4 languages?

[POURCHET 25]

Hello,

Regarding the regulation of the underfloor heating I can give you some info on my installation which works. I have a wooden frame house of 250m2 in the Haut Doubs and I heat with 1 pellet stove with hot water production, coupled with 1 heated floor for the Rch and 4 radiators for the basement.
The regulation of the water temperature for the underfloor heating is a simple thermostatic valve connected just after the circulator between the flow and return circuit. The stove then manages for the water temperature on its hot water circuit. The heat for the rooms is produced by the direct radiation from the stove (3KW) and the inertia is given by the underfloor heating.

Compared to what is said above and the rest of the forum, so we can directly couple the hydro stove and the underfloor heating (without bottle, nor tank and all the valves and regulations which are added to it), for a mini price?

cdslo, can you give me the coordinates of your heating engineer, because I also build in the upper doubs, THANK YOU

[etchelolo]

Hello, I am a teacher and I would like to study your system with my students. I make them work on millennia and I find that it would make a nice activity for them.
Could you give me some marbles? thank you