for 5 kw on 150 m I think that 10 mm² should be enough
but if by chance you should one day reinforce the power takes as standard the edf standard which gives you for a normal supply of 9 kw of 16 mm²
obviously it's more expensive
Manufacturing a bucket wheel with an irrigation reel
manufacture of a bucket wheel with an irrigation reel
I brought the water head straight to the wheel and the centrifugal ejection effect always occurs. I think I have to build a
upper apron or review the space between my buckets
the wheel is currently turning at 36tminute with 210l second
so still work to maximize the performance of my wheel
photos on gallery
see you soon
fredo24
upper apron or review the space between my buckets
the wheel is currently turning at 36tminute with 210l second
so still work to maximize the performance of my wheel
photos on gallery
see you soon
fredo24
0 x
I would even provide a motorized valve, to later be able to control the water flow to the voltage produced by the generator.
When there is no load on the generator, it will oppose little resistant torque, the wheel will turn faster and therefore the voltage at the output of the generator will be important.
When you connect a load to the generator, the resistant torque will be high and the wheel will slow down, the voltage at the output will collapse.
A small regulation which increases the water flow when the tension decreases would be interesting.
When there is no load on the generator, it will oppose little resistant torque, the wheel will turn faster and therefore the voltage at the output of the generator will be important.
When you connect a load to the generator, the resistant torque will be high and the wheel will slow down, the voltage at the output will collapse.
A small regulation which increases the water flow when the tension decreases would be interesting.
0 x
-
- I learn econologic
- posts: 21
- Registration: 01/04/10, 21:09
- Location: Avignon
Manufacturing a bucket wheel with an irrigation reel
Hello, Do you have my message put in a comment on your photos, how I have several solutions about your Wheel
michel avignon
michel avignon
0 x
michel avignon handyman
-
- Moderator
- posts: 79353
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 11059
Re: Manufacturing of a bucket wheel with an irrigation reel
Old photos forum imported into the 1er message ...
See also this subject for the rest of this project: energies-renewable / Wheel-a-bucket-of-reel irrigation suite-t10440.html
See also this subject for the rest of this project: energies-renewable / Wheel-a-bucket-of-reel irrigation suite-t10440.html
0 x
Do a image search or an text search - Netiquette of forum
-
- Similar topics
- Replies
- views
- Last message
-
- 1 Replies
- 12001 views
-
Last message by dedeleco
View the latest post
16/06/11, 16:41A subject posted in the forum : Hydraulic, wind, geothermal, marine energy, biogas ...
-
- 23 Replies
- 97722 views
-
Last message by dedeleco
View the latest post
01/07/11, 17:14A subject posted in the forum : Hydraulic, wind, geothermal, marine energy, biogas ...
-
- 26 Replies
- 25156 views
-
Last message by nialaz
View the latest post
18/05/09, 22:22A subject posted in the forum : Hydraulic, wind, geothermal, marine energy, biogas ...
-
- 53 Replies
- 303241 views
-
Last message by coucou789456
View the latest post
25/03/10, 16:18A subject posted in the forum : Hydraulic, wind, geothermal, marine energy, biogas ...
-
- 9 Replies
- 9263 views
-
Last message by zac
View the latest post
10/11/06, 20:30A subject posted in the forum : Hydraulic, wind, geothermal, marine energy, biogas ...
Back to "hydraulic, wind, geothermal, marine energy, biogas ..."
Who is online ?
Users browsing this forum : No registered users and 212 guests