How to set a Windmaster for 600 black?

Renewable energies except solar electric or thermal (seeforums dedicated below): wind turbines, energy from the sea, hydraulic and hydroelectricity, biomass, biogas, deep geothermal energy ...
Ruthenian
Éconologue good!
Éconologue good!
posts: 318
Registration: 02/11/05, 15:22




by Ruthenian » 12/11/12, 21:57

Both reasons:
Your job counter counts Resistive Watts but it also displays the reactive power. So be careful.
Your ampere meter is not wrong because it does not differentiate between reactive or resistive measurement.
You stop me if I'm wrong.
Wind level by home is also the cat, the average wind is often 3 m / s. The black with the setting of the Volker curve does not produce much. Nothing a few 10zans of watts a day.
0 x
coccigro
I understand econologic
I understand econologic
posts: 89
Registration: 19/08/12, 22:55
Location: Loiret, Orléans Forest
x 2




by coccigro » 27/12/12, 20:58

Good evening,
with winter, strong winds have returned. it's an opportunity to observe my wind turbine and refine my curve. I think I'll reach the goal soon.
I test a last little modification and I summarize what I have learned and done.
good night.
0 x
Ruthenian
Éconologue good!
Éconologue good!
posts: 318
Registration: 02/11/05, 15:22




by Ruthenian » 27/12/12, 22:02

I look forward to seeing your synthesis because on my side, it's the cat at the performance level. I gave Hermann the settings because I could not test (much too much taf and never there). What is on it is that the results are not there. about 2-3 KWh product !!!
I think it's a problem of tuning because when I change the curves of the windmaster. At the moment, the performances fly away and very quickly they collapse as soon as it has stalled. It's obvious. Did you notice the same things? At the turbulence level. on my site, I am a little disgusted because the turbulence appear towards 25 km / 30 km / h. The results then, with Hermann's settings, are catastrophic (3 at 4 times less than advertised); as Dedeleco said.

I checked the data counting Windmaster and Sagem approved. The measurements are identical.

I bought a digital scope, I can do some measurements if someone asks me.
0 x
coccigro
I understand econologic
I understand econologic
posts: 89
Registration: 19/08/12, 22:55
Location: Loiret, Orléans Forest
x 2




by coccigro » 28/12/12, 14:38

hello ruthene,

I did not know what you are describing after a curve change. but I may not be a regular enough wind to make continuous measurements. I see very clearly the impact of the curve on the speed of the wind turbine at a given wind, and on the production at ion a given incoming voltage.

as far as I am concerned, there is a difference the windmasterr count and my actaris counter. I suppose the meter counts the resistive and reactive watts (real and apparent?) of which you speak higher while the windmaster counts only the real watts.

I also have a low production but tanpis, I burst with my measurements and my tests.
0 x
Ruthenian
Éconologue good!
Éconologue good!
posts: 318
Registration: 02/11/05, 15:22




by Ruthenian » 28/12/12, 18:03

Make the changes when the wind is blowing well; you will see the reaction.

What are your last settings?

As Deleleco said, it would take a PIC and an anometer that measures, calculates and anticipates production ... Because we are much too turbulent.

I put the settings of Hermann because with them the blades turn less fast and therefore much less noise.
Actaris, is he a certified? They replace the Sagem.
Okay, I'm talking about the Watt count per Watt, not the indication of conso VA on the meter. Because the last one indicates an 60-90 VA when the Windmaster starts. This is reagent due to the Windmaster 220 VAC filter circuit. I would compare with my GTI Chinese who do not give reagent (serious !!!) but who consume a little empty. They must be dismounted !!!

Nobody else has feedback on this system?
0 x
Skylee
I discovered econologic
I discovered econologic
posts: 4
Registration: 05/01/13, 17:52

wifi connection.?




by Skylee » 16/01/13, 00:38

Good evening to all the teams could you inform me please.
and it possible to connect my laptop to my mastervolt in wifi connection or by other system than the wired because of my house, I see my wind turbine and would be nice to change the parameters to be in the wind and see especially in case of wind stall, to be able to adjust the setting
thank you in advance to all the team
cordially!!!
0 x
Ruthenian
Éconologue good!
Éconologue good!
posts: 318
Registration: 02/11/05, 15:22




by Ruthenian » 17/01/13, 22:59

I think the interface is RS485. So with an adequate cable, you can reach 1.2 km.
She's far away from your wind turbine?
Otherwise apart from a converter RS485 IP Wifi, I do not see.
With the cable, it's better.
0 x
Skylee
I discovered econologic
I discovered econologic
posts: 4
Registration: 05/01/13, 17:52

wifi connection.?




by Skylee » 18/01/13, 00:43

good evening thank you for the answer no, my windmill is not far from my house on a small local, but I can not spend wired, and for the connection I saw that it was rj 12 is mark on the manual, connection as the rj11 or rj 45 I think but if I'm wrong the rj 12 is an international connection, if by chance it speaks to you keep me informed friends if it is possible? a connection by wifi or I think by Cpl but I am in the blur to change the settings from home is the top! thank you in advance
cordially!
0 x
Ruthenian
Éconologue good!
Éconologue good!
posts: 318
Registration: 02/11/05, 15:22




by Ruthenian » 23/01/13, 07:19

Hello,

For what has a Windmaster, I found something that can enormously distort the results.

The internal counter increments 10 Watt to 10 Watt. During this phase if the Windmaster stops (wind too weak) and it starts again it does not take into account what it has already counted.
This can greatly influence the final result.

Check it, tell me if you had noticed the same thing.

It's impressive but at the limit understandable.
0 x
coccigro
I understand econologic
I understand econologic
posts: 89
Registration: 19/08/12, 22:55
Location: Loiret, Orléans Forest
x 2




by coccigro » 06/03/13, 22:17

Good evening,
I actually noticed a difference between what the windmaster says and my meter (the windmaster counts a little less). but I attributed it to a lack of precision of my meter. if he is right, so much the better.
0 x

 


  • Similar topics
    Replies
    views
    Last message

Back to "hydraulic, wind, geothermal, marine energy, biogas ..."

Who is online ?

Users browsing this forum : No registered users and 285 guests