PMG Aerogenerator

[villabonni]

Hello everyone, happy new year

Still within the framework of wind turbines with a horizontal axis and more particularly with a vertical axis, can we superpose several rotors + stator sub-assembly in a volume X, without any interaction?
http://www.scoraigwind.com/axialplans/index.htm

Thank you in advance for your help.
PS If you have links in French on the subject, thank you again.

[zac]

Hello

not well understood your question, you speak about the electrical part or "fan"?

if it is the "fan" part: no problem on the vertical axes (just reverse the direction of rotation so that your axis does not wiggle); on the horizontal axes it is extremely close to take advantage of the venturia effect or (this that I recommend) separated by at least 1/3 of the diameter of the blade.

for the electrical part I am not competent

@+

[villabonni]

Hi Zac,

my question actually concerns the generator part and not the fan. I just want to know if we can lay out several staror-rotor assemblies on the same transmission shaft (vertical type darrieus) without the magnetic fields being disturbed? Are there minimum distances between the sub-assemblies?
thank you for your answers

[zac]

resalut

if you shield them well with a faraday cage, it shouldn't be a problem.

Finally, you don't get too mad on a lot of cars. The starter is near the computers and the alternator and it works impeccable.

@+

[denis]

quite accort with zac, separates with a sheet, that's it

[villabonni]

Thank you both, have a good evening.