Belgium: roll the tax-free oil !!

crude vegetable oil, diester, bio-ethanol or other biofuels, or fuel of vegetable origin ...
User avatar
Woodcutter
Econologue expert
Econologue expert
posts: 4731
Registration: 07/11/05, 10:45
Location: Mountain ... (Trièves)
x 2




by Woodcutter » 17/04/06, 13:53

And for the answers to my questions? It's too complicated ?: roll:
0 x
User avatar
lau
Grand Econologue
Grand Econologue
posts: 814
Registration: 19/11/05, 01:13
Location: vaucluse




by lau » 17/04/06, 16:13

Andre wrote:I find the handling too dirty, easier to put gas oil. So these young men are sometimes a little strong on the mixture and it rolls very often in the carpet, which makes it necessary to deposit the breeches and one can see, one can better what it gives. Most of the time it is the injectors that clog, slows less well, so tendency to flow, this results in a knock like a smashed engine, if we insite to roll like that for the engine WV it burns a small langette on the edge of the piston the combustion chamber or spits.
With the experience you just have to put down the injectors and do a cleaning and everything goes in order (at the same time it teaches the mechanics to the young people)

I am of the opinion of professor that for the engines injections new generation high pressure the oil march is not recomandé, that can do some time, but in the long term it is courrire after the troubles ..

For ZAC
Your problem of loss of power when you walk with oil, we experienced that it was the feed pump that does not come with oil, we put a pump in series to force the filter.
To know it, it's time to go back and see how long it takes to fill a 10 liters with diesel and with a diesel oil mixture

Andre


Mass has been said!
For the HVB it will be without me!
0 x
The number of molecules in a drop of water is equal to the number of drop that contains the Black Sea!
User avatar
professeur31
Pantone engine Researcher
Pantone engine Researcher
posts: 113
Registration: 20/12/04, 20:28




by professeur31 » 17/04/06, 16:33

Woodcutter wrote:And for the answers to my questions? It's too complicated ?: roll:


Yes, it is surely that: too complicated!
And since I quote you "I'm farting", search all alone, it will take care of you! and since you are there, you have to learn to talk to people differently because I have never insulted you in this way.

bye
0 x
Christophe
Moderator
Moderator
posts: 79117
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10972




by Christophe » 17/04/06, 16:34

Prof stp stop the full writing in bold (I corrected myself your post)
0 x
User avatar
pluesy
Éconologue good!
Éconologue good!
posts: 291
Registration: 26/11/04, 22:39
Location: 88 saint die vosges
x 1




by pluesy » 17/04/06, 17:13

me if I had a dci I will not take the risk of bouncing the injection and the engine I will try instead to inject the hvb via a pantone it seems less risky ...
0 x

"There are only two infinite things, the universe and human stupidity ... but for the world, I have no absolute certainty."
[Albert Einstein]
Other
Pantone engine Researcher
Pantone engine Researcher
posts: 3787
Registration: 17/03/05, 02:35
x 12




by Other » 17/04/06, 17:51

Hello Pluesy

This is just what I think without breaking the head to filter
of oil, it is enough to make a bubbler that works directly with the highly heated potato oil and passes into a reactor ensuit in the diesel (a doping with the oil) what I wanted to do at the beginning before doing a doping the water
But doped in this way also requires caution, it should not slow down the engine is not that of that otherwise it may go into fear.
The other disadvantage that I noticed on a small assembly remains a residue at the bottom of the bubbler, and in the long run a clogging of the heating of the oil, thus still a dirty handling to do with oil sticky, escapes in the bodywork it is necessary to clean with acetone so it is sticky, especially the oil cooked CANOLA ..
My son rolls for quite some time with and it suits them with some precaution. I'm not saying that one day I will not ride with oil, currently the diesel is 1,05 $ per liter
and a good doping with water is satifaisant ...

Andre
0 x
User avatar
professeur31
Pantone engine Researcher
Pantone engine Researcher
posts: 113
Registration: 20/12/04, 20:28




by professeur31 » 17/04/06, 17:53

Completely agree with both of you: too much risk on new engines to run on oil.
0 x
User avatar
geotrouvetout
I understand econologic
I understand econologic
posts: 108
Registration: 18/09/05, 21:10
Location: 76




by geotrouvetout » 17/04/06, 18:10

Hello,

and a condensate of oil (distilled oil) a mini solar oven (remain econologist) and the turn is played, is it in the realm of possible ???
Or what would be the process of modifying the oil for which is the property of use in an engine HDI ???

GEO : Idea: .
0 x
User avatar
pluesy
Éconologue good!
Éconologue good!
posts: 291
Registration: 26/11/04, 22:39
Location: 88 saint die vosges
x 1




by pluesy » 17/04/06, 18:48

bin in theory a pentone ca distills everything that passes in ...

and I'm not sure that by distilling in "fixed" one is sure to get the qualitée diesel

the only apparently good method is to mix oil with alcohol and other chemicals and stir everything for several days I read the recipe here : Arrow: https://www.econologie.com/forums/fabriquer-du-diester-ou-biodiesel-la-recette-t1141.html but it still looks pretty complicated except for those who are fond of cooking ... oil : Lol:
0 x

"There are only two infinite things, the universe and human stupidity ... but for the world, I have no absolute certainty."
[Albert Einstein]
User avatar
Woodcutter
Econologue expert
Econologue expert
posts: 4731
Registration: 07/11/05, 10:45
Location: Mountain ... (Trièves)
x 2




by Woodcutter » 18/04/06, 11:40

Professor31 wrote:
Woodcutter wrote:And for the answers to my questions? It's too complicated ?: roll:


Yes, it is surely that: too complicated!
And since I quote you "I'm farting", search all alone, it will take care of you! and since you are there, you have to learn to talk to people differently because I have never insulted you in this way.

bye
It's a shame ... You could have advanced the knowledge here, but given your answers, I even wonder if I have to believe at the beginning of what you said ...

Sorry to have touched your susceptibility, but that's the risk when playing divas, style: "I know, but I do not want to waste time to inquire" ...

As forlearn to talk to people differently, I'll give you your advice: go and read your fat answer about the operation of the engines and come back and tell me it was friendly, friendly and everything ... and everything ...

PS: where's that an insult?
0 x

 


  • Similar topics
    Replies
    views
    Last message

Back to "biofuels, biofuels, biofuels, BtL, non-fossil alternative fuels ..."

Who is online ?

Users browsing this forum : No registered users and 146 guests